Baby Jogger Glider Board Bruksanvisning

Baby Jogger Sittvagn Glider Board

Läs gratis den bruksanvisning för Baby Jogger Glider Board (5 sidor) i kategorin Sittvagn. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 18 recensioner. Har du en fråga om Baby Jogger Glider Board eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Glider Board
babyjogger.com
LE SIÈGE SUSPENDU PLATAFORMA GLIDER BOARD
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS POUR L'ASSEMBLAGE
INSTRUCCIONES DEL ENSAMBLAJE
BEDIENUNGSANLEITUNG
CITY
MINI GT™
MINI™
CITY
ELITE™
CITY
PREMIER™
CITY
SELECT®
PD349006C
CITY
SELECT®
LUX
2
1
4
10
13
2
5
11
14
3
6 7 8
9
12
15
A
B
3
IMPORTANT - Read these instructions carefully
before use and keep them for future reference. Your
childs safety may be affected if you do not follow
these instructions.
1 Insert wheel axle into the hole on the underside of
the Glider Board. The wheel is secure when you
hear it click. Repeat on other side.
2 Slide ratchet straps between the lower support
bar .and the brake rods.
3 Push attachment brackets onto lower support bar
until they clip into place.
4 Press ratchet lock tab (a) and slide ratchet strap
through opening (b). NOTE: DO not trap brake
wire between ratchet strap and lower support bar.
5 Push ratchet strap through until snug. Repeat on
other side.
To adjust Glider Board Angle:
Note: Glider board must be parallel to the ground
or slightly angled toward the stroller before use.
Depending on your stroller model, you may need to
adjust the angle.
6 Push the safety cover away from the tabs.
7 To Raise: Press gray tabs on right and left side of
Glider Board and pull edge up.
To Lower: Press gray tabs on right and left side of
Glider Board and push front edge down.
8 Pull safety cover back over the tabs.
To adjust Glider Board Length:
9 Pull handle on the rear underside of Glider Board.
10 Pull out to extend.
11 Push in to shorten.
Storage (while using the stroller):
12 Raise Glider Board and unhook storage straps
from underside.
13 Hook storage straps around rear crossbar of
stroller frame.
Note: When stored, make sure the rear of the
Glider Board is not interfering with the back of the
stroller seat. Adjust Glider Board length for storage
if necessary.
Storage (while folding the stroller):
14 The Glider Board wheels must be removed before
you can fold the stroller. Follow steps 12 and 13
of the Glider Board Storage instructions (above),
then remove the wheels. Press wheel release
button and gently pull out wheel to remove.
To Remove Glider Board:
15 Press ratchet lock tab and pull ratchet strap out.
Unclip attachment brackets.
ASSEMBLY INSTRUCTIONS
WARNING: Recommended for children from 2
years old up to a maximum weight of 45 lbs (20kg).
WARNING: Never leave child unattended.
WARNING: Always secure seat recline strap by
snapping the D-ring to the recline clamp before
using the Glider Board.
WARNING: Always ensure the safety covers are
covering the adjustment tabs prior to use.
WARNING: Always make sure storage straps
are fastened to the underside of the Glider Board
before use.
WARNING: Always make sure the ratchet straps
are securely tightened before use.
WARNING: Do not run or skate with this product
attached to a stroller/pushchair.
WARNING:
EN


Produktspecifikationer

Varumärke: Baby Jogger
Kategori: Sittvagn
Modell: Glider Board

Behöver du hjälp?

Om du behöver hjälp med Baby Jogger Glider Board ställ en fråga nedan och andra användare kommer att svara dig