Bang And Olufsen BeoLab 4000 Bruksanvisning
Bang And Olufsen
högtalare
BeoLab 4000
Läs gratis den bruksanvisning för Bang And Olufsen BeoLab 4000 (12 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4 recensioner. Har du en fråga om Bang And Olufsen BeoLab 4000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
BeoLab 4000
Guide
WARNING: To reduce the risk of re or
electric shock, do not expose this appliance
to rain or moisture. Do not expose this equip-
ment to dripping or splashing and ensure
that no objects lled with liquids, such as
vases, are placed on the equipment.
To completely disconnect this equipment
from the AC Mains, disconnect the mains
plug from the wall socket. The disconnect
device shall remain readily operable.
The lightning ash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of un-
insulated “dangerous voltage” within the
product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and main-
tenance (servicing) instructions in the
literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualied
service personnel.
Daily use
When you have nished setting
up the loudspeakers as described
on the following pages, connect
the entire system to the mains
supply. The indicators light up
in red, indicating that the loud
speakers are in standby, ready
to be used. The loud speakers
are designed to be left in this
standby mode when not in use.
Cleaning the loudspeaker
Clean dusty surfaces using a dry,
soft cloth. If necessary, remove
grease stains or persistent dirt with
a soft, lint-free cloth which you
have dipped in lukewarm water
and wrung rmly.
You can clean the front cloth with
a vacuum cleaner with a brush
nozzle, and set to the lowest level.
Clean the cooling ns on the rear
using a soft brush or a vacuum
cleaner.
Switching on and off
When you switch on your system,
the loudspeakers switch on
simultaneously, and the indicator
lights turn green. When you switch
the sys tem off again the loud-
speakers also switch to standby.
If the loud speakers are connected
to a non-Bang & Olufsen system
they switch on when a signal is
received from the sys tem. They
switch off a few minutes after the
signal has disappeared.
Never use alcohol or other solvents
to clean any parts of the loud-
speaker!
BANG & OLUFSEN
3
Indicator light
NOTE! Prolonged listening at high
volume levels may cause hearing
damage.
Produktspecifikationer
| Varumärke: | Bang And Olufsen |
| Kategori: | högtalare |
| Modell: | BeoLab 4000 |
Behöver du hjälp?
Om du behöver hjälp med Bang And Olufsen BeoLab 4000 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Bang And Olufsen Manualer
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
21 September 2024
17 September 2024
4 September 2024
3 September 2024
26 Augusti 2024
25 Augusti 2024
högtalare Manualer
- Maxell
- Zvox
- Elvid
- TWF
- Totem
- Definitive Technology
- AudioSource
- DCM
- LD Systems
- Sangean
- Real-El
- Ewent
- MONDO
- TM Electron
- Punos
Nyaste högtalare Manualer
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025