BDI Sequel 6005A Bruksanvisning

BDI Inte kategoriserad Sequel 6005A

Läs gratis den bruksanvisning för BDI Sequel 6005A (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 15.5 recensioner. Har du en fråga om BDI Sequel 6005A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

C - 5/32” x 12mm

Phillips Screw

x 20

a s s e m b l y i n s t r u c t i o n s

bdiusa bdiusa.com customerservice@ .com

Your Sequel Home Office Furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Sequel Home Office Furniture is designed for indoor use on level floors.

Clean steel parts and wood veneer with a moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. Note that some components

are shipped inside the cabinet. The assembly workspace should be a non-

marring surface such as carpet. A Phillips Screwdriver will be needed for

assembly. For missing hardware pieces, please contact BDI Customer

Service at customerservice@bdiusa.com. For all other concerns, please

contact your BDI Retailer.

Step 2

Install Casters

Carefully position on its top surface so that bottom surface is Cabinet (B)

up, then attach a Caster at each of the five (5) exposed installation plates

using and a Phillips Screwdriver. 5/32” x 12mm Phillips Screw (C)

Component List

E - Center Caster x 1

F - Rear Caster x 2

J - Glass Top x 1

K - Legal File Folder

Stretchers x 4

D - Brake Caster x 2

B - Cabinet x 1

A - 4mm Allen Wrench x 1

‘Sequel’ is a trademark of Becker Designed, Inc.

Made in Taiwan. 6005REV121509v2

FRONT

C x 8

C x 4

C x 8

D x 2

E x 1

F x 2

6001

6002

6005

6006

6007

G - 5/32” x 22mm

Phillips Screw

x 4

I - 1/4”-20 x 15mm

Screw x 3

H - Drawer Pull x 2

Se q u e l

6005 t all file cabinet

Sequel

assembly instructions

bdiusa bdiusa.com customerservice@ .com

I x 3

G x 4

H x 2

Step 3

Install Handles.

Carefully turn pedestal upright so that it rests evenly on all

installed casters, then install one Drawer Pull (H) per drawer

using the 5/32” x 22mm Phillips Screw(G) and a Phillips

Screwdriver.

Step 4

Install Glass Top

Carefully place Glass Top (J) on pedestal’s top surface,

aligning the pre-installed pucks over the corresponding

mounting point on the pedestal. Attach Glass Top (J) by

opening drawer and fastening from underside (inside

drawer) using three (3) 1/4”-20 x 15mm Screws (I) with

provided Allen Wrench (A).

NOTE: Glass Top (J) fastens at three (3) points only---two

(2) near front edge and one (1) at center. Pucks near rear

edge do not accept screws and merely rest in place.

DO NOT OVER-TIGHTEN.

Step 5

File Folders

Users who wish to use legal-length files may install provided

Legal File Folder Stretchers (K) by dropping into place near

front and back of file drawers.

Produktspecifikationer

Varumärke:	BDI
Kategori:	Inte kategoriserad
Modell:	Sequel 6005A
Vikt:	38000 g
Bredd:	390 mm
Djup:	610 mm
Höjd:	740 mm
Förpackningens bredd:	800 mm
Antal lådor:	2 lådor
Ramfärg:	Espresso
Låddjup:	710 mm
Vikt inkl. förpackning:	43000 g
Styrhjul:	Ja
Ram material:	Trä