B.E.G. LC-plus 280 Bruksanvisning
B.E.G.
Inte kategoriserad
LC-plus 280
Läs gratis den bruksanvisning för B.E.G. LC-plus 280 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 8.5 recensioner. Har du en fråga om B.E.G. LC-plus 280 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
60˚
2
1
1
2
2
1
LUXOMAT
®
LC-plus 280
1
2
3
LUXOMAT
®
IR-LC-plus
3
1:4
1.
0.5
0.25
Futura Book 24Pt
> 1m
4
1 2
1
2
T
15s
1
2
4
6
8
16
10
12
30s
1
2
1
3
2
RESET
TE S T
PARTY
COMFORT
LUXOMAT
®
IR-RC mini
IR-LCmini
TEST
16
12
84
15s 30s
1
1,5 2 3 5 6 7 10
200°
280°
16 m
16 m
Operating and mounting instructions for motion detector LUXOMAT
®
LC-plus 280
5. Putting into operation / Settings
1)
Caution: have all work involving the 230V
mains supply carried out by a qualified elec-
trician! Before starting disconnect the mains!
Please be aware, that the LUXOMAT
®
LC-plus
280 is not suitable as an intrusion detector,
since it is not equipped with a tamper contact.
2) Socket base corner mounting
Important: The LUXOMAT
®
LC-plus 280 has
to be mounted in such a way, that the adjusting
elements/rotary regulators are always pointed
downward.
1) Wall mounting
2) Outside corner mountable with plug-in
socket (included)
1) Connection cable from top down
2) Connection cable from below
3) Terminal markings
(Wiring diagrams see point 16)
1) Press here for separation of terminal case
and plug-in socket
2) Mount the plug-in socket with two screws
and the enclosed seal rings on a firm base
(Pay attention to inserting of the connection
cable, see point 4)
Follow-up time
Test operation, 15 sec. ... 16 min., Pulse operation
(Test operation: range testing, detector switches
on/off the lighting at any recognized movement)
Lux value
Night operation...Dusk...Day operation
(Day operation: light sensor inactive, switching at
any brightness value)
On delivery the potentiometers are adjusted in
position “TEST” and “SUN” symbol (daytime
operation). With this adjustments the following
regular values are active:
Follow-up accommodation: 3 min.
Lux value: approx. 20Lux
Reset: The adjusting into “Factory settings” from
any other position causes a “Reset” of the device.
That means all parameters are resetted into factory
settings (fast LED-flashing).
LED Functional display
Slow flashing: EEPROM empty
Fast flashing: EEPROM is written
During the self-testing cycle, the LUXOMAT
®
LC-plus
280 will only react to commands “RESET” and
“LIGHT OFF”
1) If possible mount unit on a safe place
(wall or ceiling mount).
2) Influence of weather reduces the lifetime of
the unit. Please take care to mount correctly.
3) Minimum distance to switched lighting,
frontally or laterally to device: 1m
4) Never mount the connected lights below the
motion detector!
1)
LUXOMAT
®
IR-LC-plus (accessory, see point 20)
2)
LUXOMAT
®
IR-LCmini (accessory, see point 20)
Caution: Settings with remote control subscribe
the settings by courtesy of potentiometers (see
point 5) (for description see point 12).
1. Mounting preparations 2. Mounting types
4. Inserting of the connection cable
9. Exclude sources of interference
10. Mounting place
3. Plug-in socket
11. Settings of remote control
8. Sensitivity adjustment (mounting height 2.50 m);
mounting height min. = 2.00m
(Sensor head justified horizontally, see point 7)
1) Range walking across: approx. 16 m
2) Range walking towards: approx. 9m
3) Anti-creep: approx. 2 m
7. Sensor head optics
Self test cycle
After mounting and connecting the 230VAC supply
voltage, the LED flashed for 1min. to show a self testing
unit. Then the unit is ready for operation and the set-
tings can be made manually or with remote control
(see point 11).
6. Factory settings
Follow-up time Lux value
By swinging the sensor head horizontally
(approx. ±45°) and vertically (approx. ±15°)
the detection area can be changed.
1) Blind for limiting creep-under protection
and backward detection
2) Blinds for reduction of far-away and
close-by areas by 60° each
3) Blinds for reduction of far-away areas by
60° each
2 m
9 m
16 m
280°
20 m
2,50 m
GB
& “TEST”
Produktspecifikationer
| Varumärke: | B.E.G. |
| Kategori: | Inte kategoriserad |
| Modell: | LC-plus 280 |
Behöver du hjälp?
Om du behöver hjälp med B.E.G. LC-plus 280 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad B.E.G. Manualer
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Inte kategoriserad Manualer
- Tornado
- Contour Design
- Nostalgia
- X-Lite
- Smart
- Red Panda
- Zeiss
- Evga
- Cooper & Quint
- Wagner
- Essenza
- Revel
- Seiko
- PCE
- KDK
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025