Berner Industrial Direct Drive 16 Bruksanvisning
Berner
Luftkonditionering
Industrial Direct Drive 16
Läs gratis den bruksanvisning för Berner Industrial Direct Drive 16 (4 sidor) i kategorin Luftkonditionering. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 12.5 recensioner. Har du en fråga om Berner Industrial Direct Drive 16 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Thank you for choosing Berner.
Berner International has been saving energy and creating healthy, comfortable environments for our customers
for over 60 years. Berner oers unmatched quality, performance, and dependability—not to mention our service.
At Berner, we stand behind our products.
1. To operate using the built-in Intelliswitch digital controller, proceed to the Quick Start Operation Guide.
NOTE: For a detailed Intelliswitch Programming Guide, go to www.Berner.com/Intelliswitch
2. Unheated units will have the fans activated by a door switch or sensor. The unit speed can be selected via the
Intelliswitch™ display or the Berner AIR App*
3. Heated units will have fans activated by a door switch or sensor, but may also be activated by the thermostat in
Comfort Plus Mode. The unit's speed can be selected via the Intelliswitch display or the Berner AIR App.*
4. To operate using the Berner AIR™ App*, download the app and follow the prompts. Requires on-site, secure
wi- connection. Berner recommends having the on-site user(s) set-up the Berner AIR™ App on his/her smart phone.
5. To operate using BACnet-IP client, download the Berner AIR™ App*. In the settings menu of the app, select the
BACnet option. Follow the prompts to congure the BACnet controller.
To connect via wire, see Appendix BACnet-IP Integration.
*NOTE: The air curtain must have been ordered from the factory with the Berner AIR (smart controller & App) option.
A. GENERAL OPERATIONS
December, 2022
©Copyright, 2022 Berner International
READ ALL INSTRUCTIONS BEFORE INSTALLING OR USING AIR CURTAIN
Industrial Air Curtain
with Intelliswitch™
www.Berner.com
®
WHEN THE DOORS ARE OPEN
™
save energy & create healthy, comfortable environments
This air curtain comes with the Berner Intelliswitch™ Digital Controller
built-in to control and schedule fan activation, fan speed selection, and heat activation.
If the optional Berner AIR™ system (smart controller and app) was ordered, it includes additional features
such as BACnet capability. The air curtain must be properly installed before either of these can be used.
A. Read all instructions before installing or using this air curtain.
B. Use this unit only in the manner intended by the manufacturer and described in this manual. Any other use not recommended by the
manufacturer may cause re, electric shock, or injury to persons. If you have any questions, contact the manufacturer.
C. Before servicing or cleaning unit, switch power o at service panel and lock the service disconnecting means to prevent power from
being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
D. Installation work and electrical wiring must be done by qualied person(s) in accordance with all applicable national and local codes
having jurisdiction, including re-rated construction. See page 5, ELECTRICAL CONNECTIONS (NEC Code ANSI/NFPA No. 70).
E. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
F. To reduce the risk of re, do not store or use gasoline or other ammable vapors and liquids in the vicinity of the air curtain.
G. This air curtain is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, etc. and curtains at least 1 inch from the top, back, front, sides and at least 6 feet from the discharge
of the air curtain.
H. Extreme caution is necessary when any air curtain is used by or near children or invalids, and whenever the heater is left operating
unattended.
I. Do not operate any air curtain after it malfunctions. Disconnect power at the service panel and have the air curtain inspected by a
reputable electrician before reusing.
J. To disconnect the air curtain, turn controls to "o", and turn o power to the air curtain circuit at main disconnect panel.
K. Do not insert or allow foreign objects to enter any ventilation or discharge opening as this may cause an electric shock or re, or
damage the air curtain.
L. To prevent a possible re, do not block the air intake or discharge of the air curtain in any manner.
M. The air curtain has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or ammable vapors or liquids
are used or stored.
N. This heater may include an audible or visual alarm to warn that parts of the heater are getting excessively hot. If the alarm sounds
(or illuminates), immediately turn the heater o and inspect for any objects on or adjacent to the heater that may have blocked the airow
or otherwise caused high temperatures to have occurred. DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING (OR ILLUMINATING).
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
Produktspecifikationer
| Varumärke: | Berner |
| Kategori: | Luftkonditionering |
| Modell: | Industrial Direct Drive 16 |
Behöver du hjälp?
Om du behöver hjälp med Berner Industrial Direct Drive 16 ställ en fråga nedan och andra användare kommer att svara dig
Luftkonditionering Berner Manualer
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
9 Augusti 2025
Luftkonditionering Manualer
- Simplicity
- Braemar
- Technisat
- Inventor
- Telefunken
- Zymbo
- Tosot
- Progress
- Tatung
- Cool-Space
- Tripp Lite
- Friedrich
- Tristar
- OneConcept
- Companion
Nyaste Luftkonditionering Manualer
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
19 Oktober 2025
17 Oktober 2025
17 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
13 Oktober 2025