Black And Decker BDCMTR-XE Bruksanvisning

Black And Decker Router BDCMTR-XE

Läs gratis den bruksanvisning för Black And Decker BDCMTR-XE (8 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4.5 recensioner. Har du en fråga om Black And Decker BDCMTR-XE eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

Australia

New Zealand

www.blackanddecker.com.au

QUICK CONNECT SYSTEM

BDCMTR-XE

ROuTER

ATTAChmENT

PARTS AND FEATURES

figure A

1. Router attachment

2. Spindle lock button

3. Active lock-off button

4. Nut and Collet

5. Depth stop bar

6. Depth of cut scale

7. Chip shield

8. Base

Not shown:

Wrench

Additional accessories are available at extra cost

from your local Black & Decker dealer.

ENGLISH

(Original instructions)

WARNING:

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Intended use

Safety instructions

General power tool safety warnings

@ Read all safety warnings and all instructions provide with your power unit (BDCDMT108-XE,

before using this accessory.BDCDMT180-XE)

General power tool safety warnings

@WARNING! Read all safety warnings and all instructions.

WARNING!

Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications.

Using the router head , this tool is intended for routing wood and wood products.



• Hold 

Cutting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.

•

. Holding the

work by your hand or against the body leaves it unstable and may lead to loss of control.

• Keep handles dry, clean, and free from oil and grease. This will enable better control of the tool.

• 



handles. These precautions will reduce the risk of personal injury.

K

uncontrolled router to lift up and out of the workpiece toward the operator.

•

 KICKBACK

could cause the router to jump backwards (see 

• M Use back and/or front stops xed to the fence when doing

stopped work.

• Use sharp cutters. Dull cutters may cause the router to swerve or stall under pressure.

•  It may be extremely hot.

•  If the cutter head

is still spinning when the tool is laid down, it could cause injury or damage.

•  If the bit is in contact

with the workpiece when the motor starts it could make the router jump, causing damage or injury.

•



• 

•  Use of larger than

recommended bits can result in a hazard.

•  

• 

•



This tool is intended for consumer use only.

Produktspecifikationer

Varumärke:	Black And Decker
Kategori:	Router
Modell:	BDCMTR-XE
Färg på produkten:	Zilver
Monteringsmetod:	Bureau
Maximal viktkapacitet:	11.3 kg
Kompatibilitet med monteringsgränssnitt (min):	75 x 75 mm
Kompatibilitet med monteringsgränssnitt (max):	100 x 100 mm
Antal skärmar som stöds:	1
Tiltvinkelområde:	-75 - 10 °
Maximal skärmstorlek:	30 "
Minsta skärmstorlek:	10 "