BlendMount BMG-2027 Bruksanvisning


Sidor 2 Engels Inte kategoriserad

Läs bruksanvisningen för BlendMount BMG-2027 gratis online eller ladda ner PDF:en. 20 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

Bland
fflaunl-
ESCORT
1nnovarive
Mounting
Solutions
INSTALLATION INSTRUCTIONS FOR ESCORT IX, REDLINE EX, AND 360C
RADAR
DETECTORS
Your rear
view
mirror
has minimal clearance between
the
back
side
of
the
mirror
and the
mirror
stem.
It
Is
very
Important
that this mount I installed correctly to ensure mirror adju tabllity Is retained.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT
1 -The magnet must be removed
from the suction cup mount that
the radar detector came with.
MAGNET
2 • Unscrew and remove bolt, only
the magnetic piece is used with the
blendmount.
3 • Install aluminum threaded insert into magnet, and attach
magnet onto blendmount with lip pointed in direction as shown.
4 • Loosen the clamp screw so the top section separates from
the mid section. This will provide the necessary clearance to slide
the mount over the mirror stem as shown above.
Innovative De
ign
And
Precision Manufacturing
PAGE 1 OF 2
5 • Tighten the clamp screw until the Top and Mid Sections are slightly snug
around the mirror stem.
You
should still be able to move the mount along the
stem. Before fully tightening the clamp screw, slide the mount towards the wind-
shield as far as it will go. There should be approximately
11s
• between the back
of
the mirror and the mount as shown above.
BlendMount -US PATENT# D625,580 S, D656,811 S, 0653,980 S
D690,245
S,
D690,246 S, D690,247
Sand
other patents pending

Betygsätt denna manual


Produktspecifikationer

Varumärke: BlendMount
Kategori: Inte kategoriserad
Modell: BMG-2027

Behöver du hjälp?

Om du behöver hjälp med BlendMount BMG-2027 ställ en fråga nedan och andra användare kommer att svara dig