BlendMount BMG-2032 Bruksanvisning


Sidor 2 Engels Inte kategoriserad

Läs bruksanvisningen för BlendMount BMG-2032 gratis online eller ladda ner PDF:en. 28 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

PART# BMG-2032
Hien
ounf-
®
ESCORT
~1m111m111,11111t,
11
Innovat
ive
Mount
i
ng
So
l
ut
i
ons
LEFT HAND DRIVE VEHICLE
INSTALLATION INSTRUCTIONS
FOR
ESCORT
IX, REDLINE EX, AND 360C RADAR DETECTORS
Your rear view mirror has minimal clearance between the back side
of
the mirror and the mirror stem. It is very important
that this mount is installed correctly to ensure mirror adjustability is retained.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT
NOTE: For illustration purposes, the mount and rear view mirror shown
in
these instructions may look slightly different then YOUR
mount and rear view mirror.
3 -Install aluminum threaded
insert into magnet, and attach
magnet onto blendmount with lip
pointed in direction as shown.
MAGNET
1 -The magnet must be removed from the suction
cup mount that the radar detector came with.
UNSCREW
HERE
2 -Unscrew and remove bolt, only the
magnetic piece is used with the blendmount.
CLEARANCE
FOR MIRROR
STEM
4 -The Body Assembly must
be
removed to gain access to the CLAMP SCREW.
Remove the two socket head screws as shown above.
Be
sure to remove the lock
washer with the top screw along with the lock washer and flat washer with the
bottom screw. Loosen the Clamp Screw so there is enough clearance between
the TOP and MID SECTIONS to slide over the mirror stem.
PAGE 1 OF 2

Betygsätt denna manual


Produktspecifikationer

Varumärke: BlendMount
Kategori: Inte kategoriserad
Modell: BMG-2032

Behöver du hjälp?

Om du behöver hjälp med BlendMount BMG-2032 ställ en fråga nedan och andra användare kommer att svara dig