Body Solid G1S Bruksanvisning

Läs gratis den bruksanvisning för Body Solid G1S (31 sidor) i kategorin Träningsutrustning. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om Body Solid G1S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/31
by
Body-Solid
®
A s s e m b l y I n s t r u c t i o n s
1
Be careful to assemble all components
in the sequence they are presented.
A. Attach Main Base Frame (A) to Rear Base Frame (B) using:
Two 46 (3/8” x 2 3/4” carriage bolts)
Two 53 (3/8” flat washer)
Two 52 (3/8” nylon lock nut)
B. Attach 2 Foot Caps (9) to Rear Base Frame (B) as shown.
C. Attach Vertical Support Pillar (D) and Flat Plate (10) to Main Base Frame (A) using:
Two 42 (3/8” x 2 3/4” hex head bolt)
Four 53 (3/8” flat washer)
Two 52 (3/8” nylon lock nut)
D. Attach Angled Support Pillar (E) to Main Base Frame (A) using:
Two 42 (3/8” x 2 3/4” hex head bolt)
Four 53 (3/8” flat washer)
Two 52 (3/8” nylon lock nut)
E. Attach Convex End Cap (3) to the front of the Main Base Frame (A).
Attach Convex End Cap (3) to the top of the short pillar on top of the Main Base Frame (A).
Attach Rubber Stop (35) with Jam Nut (34) to the short pillar on the Main Base Frame (A)
as shown.
mm
Inch
2
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 6.
S T E P
1
3
S T E P

Produktspecifikationer

Varumärke: Body Solid
Kategori: Träningsutrustning
Modell: G1S

Behöver du hjälp?

Om du behöver hjälp med Body Solid G1S ställ en fråga nedan och andra användare kommer att svara dig