Boss CAM22 Bruksanvisning
Läs gratis den bruksanvisning för Boss CAM22 (2 sidor) i kategorin Dashcam. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 6 recensioner. Har du en fråga om Boss CAM22 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Specifications
The above parameters can ba modified without separate notification
Images sensors: PC1030 MT9V136 PC3030
Power upply: DC9V - 15V
Lens Angle(Deg.): 170
TV System: PAL/NTSC
Video Output: 1.0vp-p,75ohm
S/N Ratio: 48dB
IP rating: IP68
Operating -30 ~ +70 RH95%MAX.
White Balance: Auto
Minimum illumination: 0.5Lux
AGC: Auto
Electronic shutter 1/60(NTSC) 1/50(PAL)
Effective pixels: 656*492
Resolution(TV Lines): 420 480
1/10,000second
Temperature(Deg.C):
User Manual
Mini Rear-view
Flush Mount Camera
Model : CAM22
Thank you for choosing Boss Audio.
DO NOT FULLY RELY ON THE REVERSE
CAMERA WHEN BACKING UP, know your
surroundings before backing.
142*100mm
Simple Troubleshooting Guide
Image Blurring
Please check if there is water stain or dust on
the camera.
.
Image Shaking Please adjust and fix-up
.
No Image.
Please check if the power cable is well connected.
.
Note:
If any of the problems persist after check list had been made, consult your nearest
service dealer. Never attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is done properly before using the checklist .below
Problem Cause/Solution
Image Slanting Please adjust the bracket of camera
.
Please make sure good connection between the
video in and the monitor.
.
Please check if reverse gear is in place.
.
Please make sure correct setup of monitor.
.
Please make sure cleaness of the camera lens.
.
Red and black back lights 12V Line
DC 12V
DC 12V
AV
Power / video
Camera
Complete all of the required connections in the way that make all the lines
hided in the car.
Installation
1. Wire connection
2. Installation
The camera can be installed in the f ollowing way:
Flush-mount (see diagram 1)
Flush-mount: Install by drilling a hole on the rear bumper.
Attention: The camera switch is controlled by the reverse gear shift.
Car body
(diagram 1)
Produktspecifikationer
| Varumärke: | Boss |
| Kategori: | Dashcam |
| Modell: | CAM22 |
Behöver du hjälp?
Om du behöver hjälp med Boss CAM22 ställ en fråga nedan och andra användare kommer att svara dig
Dashcam Boss Manualer
31 Augusti 2024
28 Augusti 2024
25 Augusti 2024
Dashcam Manualer
- Nanocam+
- KJB Security Products
- Eufab
- NAV-TV
- Denver
- Dometic
- Genius
- Minolta
- Navitel
- Media-tech
- Kogan
- Cowon
- ADATA
- Skytronic
- Escort
Nyaste Dashcam Manualer
13 Juni 2025
6 Juni 2025
13 Mars 2025
13 Mars 2025
13 Mars 2025
21 Februari 2025
20 Februari 2025
11 Februari 2025
7 Februari 2025
4 Februari 2025