Boss DD-500 Bruksanvisning

Boss mottagare DD-500

Läs gratis den bruksanvisning för Boss DD-500 (39 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 14 recensioner. Har du en fråga om Boss DD-500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/39

Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the Batteries . . . . . . . . . . . . . . . . . . 2

Connecting the Equipment. . . . . . . . . . . . . . . 2

Turning the Power On . . . . . . . . . . . . . . . . . . 4

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . 5

Adjusting the Delay . . . . . . . . . . . . . . . . . . . . 5

Turning Delay On/O . . . . . . . . . . . . . . . . . . . 6

Switching Banks/Patches . . . . . . . . . . . . . . . . 7

Using the [TAP/CTL] Switch to Control the Delay 8

Playing Phrase Loops . . . . . . . . . . . . . . . . . . . 9

Editing a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . 12

PATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ASSIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

MIDI PC MAP . . . . . . . . . . . . . . . . . . . . . . . . . 18

Convenient Functions . . . . . . . . . . . . . . . . . . . . 19

Specifying Whether to Carry-Over the Delay

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Assigning the Functions of the [A], [B], and

[TAP/CTL] Switches . . . . . . . . . . . . . . . . . . . . 19

Synchronizing with a DAW or External MIDI

Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connection Example . . . . . . . . . . . . . . . . . . . 20

MIDI Messages That Can Be Transmitted and

Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

MIDI Messages That Can Only Be Received . . . . 21

MIDI Routing . . . . . . . . . . . . . . . . . . . . . . . . . 21

Assigning a Function to an External Pedal. . . . . 22

Restoring the Factory Default Settings . . . . . . . 24

Transmitting Data to an External MIDI Device . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 25

Main Specications . . . . . . . . . . . . . . . . . . . . . . 25

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . 26

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . 26

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES”

(leaet “USING THE UNIT SAFELY” and Owner’s Manual (p. 26)). After reading, keep the

document(s) including those sections where it will be available for immediate reference.

5High-precision 96 kHz 32-bit audio processing from input to output ensures high audio quality.

5Easily visible delay time indication and an independent [TAP/CTL] switch provide sophisticated

functionality that’s easy to use in live performance.

5A total of 12 dierent delay modes, including “VINTAGE DIGITAL” that models the SDE-3000 and

DD-2, as well as “ANALOG” and “TAPE.”

5The memory function lets you store and recall 297 dierent setups from internal memory.

“CARRY OVER” provides seamless transition that preserves the reverberant sound when

switching between patches.

5“Phrase Loop” function lets you layer new material in real time while recording and playing back.

This can be used simultaneously with delay.

5By connecting the DD-500 via a USB cable or MIDI cables, you can switch sounds and control

parameters in synchronization with your computer DAW or an external MIDI device.

Owner’s Manual

Getting Ready

Installing the Batteries

Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the

unit.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage.

Also, handle the unit carefully; do not drop it.

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you

carefully observe all of the items related to batteries that are listed in “USING THE UNIT SAFELY”

and “IMPORTANT NOTES” (separate sheet “USING THE UNIT SAFELY” and Owner’s manual (p. 26)).

* We recommend that you keep batteries installed in the unit even though you’ll be powering it

with the AC adaptor. That way, you’ll be able to continue a performance even if the cord of the

AC adaptor gets accidently disconnected from the unit.

* To prevent malfunctions or accidents, install or replace the batteries before connecting the unit

to other equipment.

* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.

Attaching the Rubber Feet

You can attach the rubber feet (included) if necessary.

Attach them in the locations shown in the illustration.

Connecting the Equipment

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all

the units before making any connections.

* Be sure to minimize the volume of your amp before you connect or disconnect cables.

DC IN jack

Accepts connection of an AC Adaptor (PSA series; sold

separately). By using an AC Adaptor, you can play without

being concerned about how much battery power you have left.

* Use only the specied AC adaptor (PSA series; sold

separately), and connect it to an AC outlet of the correct

voltage. Do not use any other AC adaptor, since this may

cause malfunction.

* If the AC adaptor is connected while power is on, the power

supply is drawn from the AC adaptor.

USB (O) port

Use a commercially available

USB 2.0 cable to connect this

port to your computer.

You can synchronize with a

DAW via MIDI.

MIDI IN, OUT connectors

Connect an external MIDI

device here.

You can synchronize with

an external MIDI device

via MIDI.

MIDI device

Getting Ready

CTL 1 ,2/EXP jack

You can control various parameters by connecting a footswitch (FS-5U, FS-5L, FS-6, FS-7: sold separately) or an expression pedal (such as

the Roland EV-5: sold separately) to the CTL 1, 2/EXP jack (p. 22).

INPUT A/MONO, B jacks

Connect your electric guitar, or another

instrument or eect unit, to these jacks.

* Use the INPUT A/MONO jack and B jack

when connecting a stereo-output eects

unit. Use only the INPUT A/MONO jack if

you’re using a mono source.

* The INPUT A/MONO jack doubles as

the power switch. Power to the unit is

turned on when you plug into the INPUT

A/MONO jack; the power is

turned o when the cable is

unplugged.

OUTPUT A/MONO, B jacks

Connect these jacks to your amp or monitor speakers.

If you’re using a mono setup, use only the OUTPUT A/MONO jack.

* Do not connect headphones to the OUTPUT A/MONO, B jacks.

Doing so may damage the headphones.

When connecting EV-5

EXP

* Use only the specied

expression pedal (EV-5; sold

separately). By connecting any

other expression pedals, you

risk causing malfunction and/

or damage to the unit.

When Connecting an FS-7

Stereo 1/4” phone type

,1/4” phone type x 2

When Connecting an FS-6

MODE/POLARITY switch

CTL 2 CTL 1

Stereo 1/4” phone type

,Stereo 1/4” phone type

MODE/POLARITY switch

When Connecting an FS-5U

(or FS-5L)

When Connecting Two FS-5Us

(or FS-5Ls)

1/4” phone type ,1/4”

phone type

CTL 1 CTL 2 CTL 1

POLARITY switch

Stereo 1/4” phone type

,1/4” phone type x 2

When connecting an FS-5L, set MODE to

“MOMENT” (p. 22).

Produktspecifikationer

Varumärke:	Boss
Kategori:	mottagare
Modell:	DD-500
Produkttyp:	Pedal/reglage
Inbyggd display:	Ja
Vikt:	1000 g
Bredd:	170 mm
Djup:	138 mm
Höjd:	62 mm
LED-indikatorer:	Ja
MIDI in:	Ja
MIDI ut:	Ja
Produktens färg:	Silver, White
bruksanvisning:	Ja
Skärmtyp:	LCD
Likströmsingång:	Ja
Batterier medföljer:	Ja
Antal USB 2.0 anslutningar:	1
6,35 mm (1/4 tum)-ingång:	1
6,35 mm (1/4 tum)-utgång:	4
Antal knoppar:	6