Briloner MAL 7191 Bruksanvisning

Briloner Lampa MAL 7191

Läs gratis den bruksanvisning för Briloner MAL 7191 (6 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3.5 recensioner. Har du en fråga om Briloner MAL 7191 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
MAL 7191

Montageanleitung
Mounting instructions
Instruction de montage
Instrucciones de montaje
Montageanledning
Monteringsinstruktion
Montasjeveiledning
Asennusohje
Montageaanwijzing
Instrukja monta u ż
ávod k montáži
Návod na použitie
Montazno navodilo
Szerelési utasítás
Instruc iunile de montaj ţ
Instruções de montagem
Montaj talimati
Mont žas instrukcija ā
Рьководство за монтаж
Инструкция по монтажу
Συναρμολογησης
ºUputstvo za postavljanje Uputstvo za montažu
¼ Упатството за монтирање
½Udhëzim për instalim
Sicherheitshinweise / Bitte lesen Sie diese Informationen sorgfältig durch, bevor Sie mit der Installation oder Inbetriebnahme dieses
Produkts beginnen. Heben Sie diese Gebrauchsanweisung für spätere Zwecke gut auf.
1. Die Leuchten dürfen nur von autorisiertem Fachpersonal nach den jeweils geltenden Elektro- Installationsvorschriften installiert werden.
2. Der Hersteller übernimmt keine Verantwortung für Verletzungen oder Schäden, die Folge eines unsachgemäßen Gebrauchs der Leuchte sind.
3. Die Pege von Leuchten beschränkt sich auf die Oberächen. Dabei darf keine Feuchtigkeit in Anschlussräume oder an Netzspannung führende
Teile gelangen.
4. Achtung! Vor Beginn der Montagearbeiten die Netzleitung spannungsfrei schalten Sicherungsautomat ausschalten bzw. Sicherung heraus drehen.
Schalter auf AUS.
5. Achtung! Vergewissern Sie sich vor dem Bohren der Befestigungslöcher, dass an der Bohrstelle keine Gas-, Wasser- oder Stromleitungen
angebohrt oder beschädigt werden können.
6. Bei der Montage ist darauf zu achten, dass das Befestigungsmaterial für den Untergrund geeignet ist und dass dieser entsprechend tragfähig ist. Für
eine unsachgemäße Verbindung des Artikels mit dem jeweiligen Untergrund kann seitens des Herstellers keine Haftung übernommen werden.
7. Das Symbol der durchgestrichenen Mülltonne auf dem Produkt oder der Verpackung bedeutet, dass dieses Produkt nicht mit dem Hausmüll
entsorgt werden darf. Das Produkt muss stattdessen am Ende seiner Lebensdauer zu einer Annahmestelle für das Recycling von elektrischen und
elektronischen Geräten gebracht werden. Bitte erfragen Sie diese Stelle bei Ihrer zuständigen kommunalen Verwaltung.
8. Schutzklasse II . Diese Leuchte ist besonders isoliert und darf nicht an einen Schutzleiter angeschlossen werden.
9. Schutzklasse II. Beim Anschließen ist darauf zu achten, dass die bauseits vorhandenen Zuleitungen bis in den Anschlussbereich hinein doppelt oder
verstärkt isoliert ausgeführt sein müssen. Die beiliegende Anschlussbox gewährleistet das, wenn die bauseits vorhandenen, einfach isolierten
Einzeladern maximal lang sind. 80 mm
10. Schutzklasse II bezieht sich nur auf den Steckertrafo. Schutzklasse III bezieht sich auf den übrigen Teil der Leuchte.
11. Bezeichnung der Anschlussklemmen: L = Phase N = Neutralleiter = Schutzleiter.
12. Abdeck- und Endkappen für Netzspannung führende Teile müssen grundsätzlich montiert werden.
13. Leuchte nicht auf feuchtem oder leitendem Untergrund montieren.
14. Stellen Sie sicher, dass Leitungen bei der Montage nicht beschädigt werden.
15. Achtung! Leuchtenteile und Leuchtmittel können während des Betriebs Temperaturen von >60°C erreichen und dürfen daher während des Betriebs
nicht berührt werden.
16. Die Leuchte besitzt den Schutzgrad und ist ausschließlich für den Einsatz im Innenbereich von privaten Haushalten vorgesehen. IP20
17. Nicht direkt in die Lichtquelle (Leuchtmittel, LED etc.) hineinschauen.
18. Die Lichtquelle dieser Leuchte ist nicht ersetzbar; wenn die Lichtquelle ihr Lebensdauerende erreicht hat, ist die gesamte Leuchte zu ersetzen.
19. Farbabweichungen bei LED´s verschiedener Chargen sind möglich. Die Lichtfarbe und Leuchtstärke von LED´s kann sich auch in Abhängigkeit
von der Lebensdauer verändern.
20.
Diese Leuchte ist nicht geeignet für Dimmer und elektronische Schalter.
21. Dieser LED-Artikel darf nur an dem beiliegenden Netzteil oder Vorschaltgerät betrieben werden.
Verehrter Kunde
Sollten sich trotz neuester Fabrikationsmethoden und genauesten Qualitätskontrollen wider Erwarten Mängel herausstellen, wenden Sie sich bitte unter
Angabe des Kaufdatums, des Kaufortes und der Artikelnummer des Produktes an folgende kostenlose Hotline: 00800/BRILONER (00800/27456637)
Briloner Leuchten / Im Kissen 2 / 59929 Brilon
Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further
reference.
1. The lamps may only be installed by authorized and qualied technicians according the valid regulations for electrical installation.
2. The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
3. Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections
or mains voltage control parts.
4. Attention! Before starting the installation work, make sure that the mains power line is voltage-free turn o safety cutout or unscrew the
protection fuse. The switch must be OFF.
5. Warning! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your
chosen mounting location.
6. When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the
xture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
7. The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household
waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please
ask your local municipality for the point of acceptance.
8. Safety class II . This light is specially insulated and must not be connected to an earthed conductor.
9. Protection class II. Take note that when switching on that the building site supply lines available have double or reinforced insulation up to the
terminal connection area. The enclosed terminal box ensures that when the building site conductors with basic insulation have a maximum length of
80 mm.
10. Protection class II applies only to the plug transformer. Protection class III applies to the remaining parts of the lighting xture.
11. Description of the supply terminals: L = Phase N = Neutral conductor = Earthed conductor.
12. Protective covers and end covers for mains voltage control parts must always be mounted.
13. Do not install the light on a damp or conductive subsurface.
14. Please make sure that no cables get damaged during the installation work.
15. Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
16. The lights have a protection class rating of and are solely intended for indoor use only of private households. IP20
17. Do not look directly into the light source (illuminant, LED, etc.).
18. The light source of this lamp is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
19. LED colour deviation when using dierent chargers may occur. The light colour and luminous strength of the LED's can also change as a result of
life span level from the lamp.
20.
This lamp is not suitable for dimmers and electronic switches.
21. This LED product may only be operated with the enclosed power supply unit or control gear.
Revision 01_09/2019 MAL7191 Page1a


Produktspecifikationer

Varumärke: Briloner
Kategori: Lampa
Modell: MAL 7191

Behöver du hjälp?

Om du behöver hjälp med Briloner MAL 7191 ställ en fråga nedan och andra användare kommer att svara dig