Brother P-touch PT-E105 Bruksanvisning
Brother
Etikettskrivare
P-touch PT-E105
Läs gratis den bruksanvisning för Brother P-touch PT-E105 (15 sidor) i kategorin Etikettskrivare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Brother P-touch PT-E105 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
ELECTRONIC LABELING SYSTEM
01
GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the Cassette
Cover by pressing the grooved tab and
pushing in the direction of the arrow, as
illustrated.
When replacing batteries or tape cassettes,
make sure the power is turned off.
This P-touch labeling system requires six (6)
AAA alkaline batteries or six (6) fully-charged
Ni-MH batteries, not included.
NOTE
This P-touch labeling system requires one of the
following (not included):
- six (6) AAA alkaline batteries,
- six (6) fully-charged Ni-MH batteries,
- AC Adapter (AD24).
1
Print Head
Tape Cutter LeverCassette Cover
1
2
Thank you for purchasing a Brother P-touch labeling system!
Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels.
This P-touch labeling system uses Brother TZe tapes. TZe tape cassettes are available in many colors and sizes. For a complete list of
tapes compatible with your P-touch labeling system, visit us at: www.brother.com
.
Please read this guide, and the included Product Safety Guide, before using this P-touch labeling system. After reading this guide, keep
it in a safe place.
English
User’s Guide
E105
NOTE
• The LCD displays one row of 15 characters; however, each label can contain up to 80 characters.
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Cassette into the P-touch labeling
system until it clicks into place.
• Make sure your Tape Cassette is marked .
• Use Brother TZe tapes with this machine.
Close the Cassette Cover and gently press
until it clicks into place.
NOTE
If you prefer to use the optional AC Adapter
(AD24) instead of using batteries:
1.
Insert the Power Adapter cord into the AC Adapter
Jack on the side of the P-touch labeling system.
2. Insert the Power Adapter into a grounded
AC electrical outlet.
LCD
1. Size
2. Cursor
3. Shift
4. Caps
5. Cable Wrap
6. Cable Flag
7. Faceplate
8. Label Length
If you have selected a specific
label length, appears.
• Label length displayed on LCD may differ slightly from the actual label length when printed.
Tape Exit Slot
Toothed Wheel
Cutter Edge
End of Tape
Tape Guides
Tape Cutter Lever
3
AC Adapter Jack
4
1
2
7
6
4
3
8
5
Produktspecifikationer
| Varumärke: | Brother |
| Kategori: | Etikettskrivare |
| Modell: | P-touch PT-E105 |
Behöver du hjälp?
Om du behöver hjälp med Brother P-touch PT-E105 ställ en fråga nedan och andra användare kommer att svara dig
Etikettskrivare Brother Manualer
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
Etikettskrivare Manualer
- Denver
- Qian
- Adesso
- Zebra
- Metapace
- Intermec
- Datacard
- SII
- Datamax-O'neil
- Dymo
- Olympia
- Phoenix
- Toshiba
- Kroy
- Olivetti
Nyaste Etikettskrivare Manualer
10 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
4 September 2025
4 September 2025
3 September 2025
3 September 2025
3 September 2025