Canarm Novalee IPL1130A01GD Bruksanvisning
Läs gratis den bruksanvisning för Canarm Novalee IPL1130A01GD (2 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 8.5 recensioner. Har du en fråga om Canarm Novalee IPL1130A01GD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
PENDANT
LIGHT
1. Install the length of rod that is
required by threading wire
through the rod and screwing it to
the fixture. Screw the canopy to
the fixture.
2. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”.
3. Mount the mounting bracket
to electrical box using electrical
box screws (not included). Make
sure the studs on the mounting
bracket are facing out from the
electrical box.
4. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical box. Connect the
black wire (or wire with marking)
from the fixture to the black wire in
the electrical box and connect the
white wire from the fixture to the
white wire in the electrical box.
5. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
6. Position fixture over studs on
mounting bracket assembly.
Secure fixture in place with star
washers and cap nuts.
7. Remove spinner nut and
support bracket from socket.
Position glass on lamp and
secure with spinner nut and
support bracket. (Please check
the glass before installing for
any cracks. Do not overtighten
the spinner nut to attach the
glass to the fixture.)
8. Install specified bulb type and
wattage (not included).
White
Black
House supply
Ground wire
Fixture
Ground wire
Tel: (613) 342-5424, Fax: (800) 263-4598
IPL1130A01
10/22
Star
Washer
Cap
Nut
Fixture
Stud
“B”
Studs
Electrical Box Screws
(not included)
Electrical
Box
Mounting
Bracket
Rod
Canopy
Fixture
Phillips
Screwdriver
Wire Cutters
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
local electrical
code
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
Bulb
Glass
Spinner
Nut
Support
Bracket
Produktspecifikationer
| Varumärke: | Canarm |
| Kategori: | Lättnad |
| Modell: | Novalee IPL1130A01GD |
Behöver du hjälp?
Om du behöver hjälp med Canarm Novalee IPL1130A01GD ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Canarm Manualer
5 April 2025
5 April 2025
5 April 2025
26 September 2024
26 September 2024
Lättnad Manualer
- Blizzard
- IDance
- Ludeco
- Sonoff
- Hikoki
- Gembird
- Raya
- LSC Smart Connect
- Aplic
- Ape Labs
- Bosch
- REV
- Duronic
- Monacor
- Nexxt
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025