Casio Collection TRT-110H-1AVEF Bruksanvisning

Läs gratis den bruksanvisning för Casio Collection TRT-110H-1AVEF (3 sidor) i kategorin klocka. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8 recensioner. Har du en fråga om Casio Collection TRT-110H-1AVEF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Operation Guide 3463

E-9

Illumination

In any mode, press L to illuminate the display for about two seconds.

xIllumination may be hard to see when viewed under direct sunlight.

xIllumination turns off automatically whenever an alarm sounds.

xFrequent use of illumination runs down the battery.

E-8

5. After you set the time and date, press A to return to the Timekeeping Mode.

E-7

3. While the seconds digits are selected (fl ashing), press D to reset the seconds to

00. If you press D while the seconds count is in the range of 30 to 59, the seconds

are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of

00 to 29, the minutes count is unchanged.

4. While any other digits (beside seconds) are selected (fl ashing), press D to

increase the number or B to decrease it. While the 12/24-hour format setting is

selected, press D or B to toggle it between 12 and 24.

xExcept for when adjusting the seconds or setting the 12/24-hour format, holding

down a button changes the current selection at high speed.

xWhen the 12-hour format is selected, the indicator P appears on the display to

indicate “P.M.” times. There is no indicator for “A.M.” times.

xWhen the 24-hour format is selected, the indicator 24 appears on the display.

xThe year can be set in the range of 2000 to 2099.

xThe watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

xThe day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

E-6

Timekeeping Mode

To set the time and date

1. Hold down A while in the Timekeeping Mode until

the seconds digits fl ash on the display because they

are selected.

2. Press C to change the selection in the following

sequence.

12/24-Hour Format

C

C

C

SecondsHourMinutes

DayMonthYear

CC

C

C

Seconds

Day of week

Month – Day

Vibration alarm on indicator

(page E-10)

PM indicator

Minutes

Hour

E-5

xThis watch returns to the Timekeeping Mode whenever you hold down the C button

for one or two seconds. If you ever lose track of what mode you are in or what you

should do next, hold down C to return to regular timekeeping.

xIn any mode press L to illuminate the display.

CC

C

Stopwatch ModeAlarm ModeDual Time Mode

E-4

General Guide

xPress C to change from mode to mode.

xAfter you perform an operation in any mode, pressing C returns to the Timekeeping

Mode.

xIf you do not press any button for a few minutes while making settings in any mode

(indicated when settings are fl ashing), the watch automatically clears the setting screen

(settings stop fl ashing) and returns to the normal display for the mode you are in.

C

Timekeeping ModeCountdown Alarm Mode

C

E-3

Alarm Mode ……………………………………………………………………………E-17

To set the alarm time ……………………………………………………………E-17

To turn the daily alarm and hourly time signal on and off …………………E-19

To test the alarm sound ………………………………………………………E-20

Dual Time Mode ………………………………………………………………………E-21

To set the Dual Time ……………………………………………………………E-21

Specifications …………………………………………………………………………E-23

E-2

Contents

General Guide …………………………………………………………………………E-4

Timekeeping Mode ……………………………………………………………………E-6

To set the time and date ………………………………………………………E-6

Illumination ……………………………………………………………………………E-9

Vibration Alarm …………………………………………………………………………E-10

To turn the vibration alarm on and off…………………………………………E-11

Countdown Alarm Mode………………………………………………………………E-12

To set the countdown start time ………………………………………………E-12

To use the countdown alarm …………………………………………………E-13

Stopwatch Mode ………………………………………………………………………E-14

To turn the Auto-Start function on and off ……………………………………E-16

E-1

About This Manual

xNote that the product illustrations in this manual are intended for reference only,

and so the actual product may appear somewhat different than depicted by an

illustration.

xAll explanations in this manual use expressions such as “sounds the alarm” for

alarm operations. When the Vibration Alarm is turned on, these expressions should

be understood to mean “causes the watch to vibrate” (page E-10).

MO1803-EA© 2018 CASIO COMPUTER CO., LTD.

Produktspecifikationer