Casio CS-2X Bruksanvisning

Casio Inte kategoriserad CS-2X

Läs gratis den bruksanvisning för Casio CS-2X (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 13 recensioner. Har du en fråga om Casio CS-2X eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Parts List

Stand Assembly / Mounting the Keyboard onto the Stand

Congratulations on your selection of the CASIO Product.

Before using the instrument, be sure to carefully read

through the instructions contained in this leaﬂet.

Be sure to keep all user documentation handy for

future reference.

Symbols

Various symbols are used in this leaflet and on the

product itself to ensure that the product is used safely

and correctly, and to prevent injury to the user and other

persons as well as damage to property. Those symbols

along with their meanings are shown below.

WARNING

This indication stipulates matters that have the risk

of causing death or serious injury if the product is

operated incorrectly while ignoring this indication.

CAUTION

This indication stipulates matters that have the risk

of causing injury as well as matters for which there is

the likelihood of occurrence of physical damage only

if the product is operated incorrectly while ignoring

this indication.

WARNING

Do not allow the bag to be placed over the

head or ingested.

Never place the plastic bag this stand comes in

over your head or in your mouth. Doing so creates

the risk of suffocation. Particular care concerning

this precaution is required where small children are

present.

Avoid locating the instrument or stand on

an unstable surface.

Do not locate the instrument or stand on an unsteady

platform, on an uneven surface, or in any other

unstable location. Doing so can cause the stand to fall

over, creating the risk of personal injury.

About the stand

When using the stand, make sure the two longer

lengths of horizontal piping are on the ﬂoor (shorter

lengths under the instrument). Never try to use the

stand while it is upside down.

Do not drop the stand or otherwise subject it to

strong impact.

CASIO KEYBOARD STAND

CS-2X

User’s Guide

MA1007-A Printed in China

Allen wrench × 1Fastening tape × 8

• 4piecesper set.Use when

changingthestandheight,etc.

Cushioning sponges × 3

Bolt × 1

Washer × 1 Nut × 1

1. With the longer lengths of horizontal piping

towards the ﬂoor, pull the short pipes apart

to expand the stand.

Fix the stand in its open position. As shown

in Figure 1, pass the bolt through the

washer and then through the hole in the

stand. Affix the nut and then tighten with

the Allen wrench that comes with the stand.

•

Tighten the bolt to the point that there is no

space between the washer and bolt.

•

You can adjust the stand to either of two

heights.

2. Afﬁx the fastening tape to the bottom of the

instrument as shown in Figure 2.

•

Position four pieces of tape so they align with

the tape on the stand, as shown in Figure 1 (a).

3. P l ac e th e in st ru me nt o nt o th e st an d

(Figure 3).

•

Adjust the position of the instrument so the

pieces of fastening tape engage with each

other.

If the stand is unstable, afﬁx the cushioning

sponges to the pipes of the legs (Figure 4).

•

Peel the tape from the backs of the sponges

and then install them.

•

Be sure to remove the instrument from the

stand before afﬁxing the sponges.

Figure 1

Figure 2

Figure 3 Figure 4

(a)

CS2X-ES-1A

Safety Precautions

WARNING

Do not climb up onto the instrument or stand.

Doing so can cause the stand to tip over, creating

the risk of personal injury. Particular care concerning

this precaution is required where small children are

present.

CAUTION

About the stand

This stand is intended for use with a CASIO Digital

Keyboard only.

Imp rop er u s e o f t h i s sta nd c a n c au se t h e

instrument to fall or the stand to tip over, creating

the risk of personal injury.

Be sure to observe the following points.

–

Use this stand only with the CASIO Digital

Keyboard model for which it is intended.

–

Do not try to use this stand for any other purpose

or application.

–

Be sure to remove the instrument from the stand

before trying to move the stand.

–

Be sure to remove the instrument from the stand

before trying to adjust the height of the stand.

–

The bolt of the stand can work loose due to the

effects of temperature and humidity changes,

vibration, and other factors. Because of this, you

need to periodically check the bolt for proper

tightness.

Be sur e t o f o ll ow the as se mb ly instructions

precisely when assembling the stand and mounting

the instrument on it. Failure to adequately tighten

the bolt or improper positioning of the instrument

can cause the stand to tip over and the instrument

to fall, creating the risk of personal injury.

When placing the instrument onto the stand, take

care that you do not pinch your ﬁngers.

Never remove the bolt while the instrument is

mounted on the stand. Doing so can cause the

keyboard to fall and creates the risk of your hands

becoming pinched by the stand legs.

Do not place heavy objects on the keyboard.

Do not place heavy objects on the keyboard. This

may cause the keyboard to tip over or fall off the

stand.

CASIO COMPUTER CO.,LTD.

6-2, Hon-machi 1-chome

Shibuya-ku,

Tokyo151-8543,Japan

Produktspecifikationer

Varumärke:	Casio
Kategori:	Inte kategoriserad
Modell:	CS-2X
Färg på produkten:	Blauw
Vikt:	340 g
Bredd:	290 mm
Djup:	60 mm
Höjd:	240 mm
Husmaterial:	Kunststof
Kraftkälla:	AC
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 Hz
Strömförbrukning (typiskt):	25 W
Limskatt:	5.83 g/min
Limstifts diameter:	12 mm