Casio WV-200E-1AVEF Bruksanvisning

Casio Titta WV-200E-1AVEF

Läs gratis den bruksanvisning för Casio WV-200E-1AVEF (5 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8 recensioner. Har du en fråga om Casio WV-200E-1AVEF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

Operation Guide 3139

MA0807-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

Caution!

Your watch is shipped with its Auto Display feature (which continually changes the

contents of the digital display) turned on. Calibration signal reception is disabled while

Auto Display is turned on.

Press any button to turn off Auto Display and return to the Timekeeping Mode.

About This Manual

•

Button operations are indicated using the letters shown

in the illustration.

•

Each section of this manual provides you with the

information you need in order to perform operations in

each mode. Further details and technical information

can be found in the “Reference” section.

General Guide

•

Press

to change from mode to mode.

•

In any mode (except when a setting screen is on the display), press

to illuminate the display.

Timekeeping Mode World Time Mode Countdown

Timer Mode

Alarm ModeStopwatch Mode

Press .

Radio-controlled Atomic Timekeeping

Day of week

Year

Home Time

(Hour : Minutes Seconds)

Month – Day

PM indicator

DST

indicator

This watch receives a time calibration signal and updates

its time setting accordingly.

•

Supported time calibration signals: Germany (Mainﬂ ingen),

England (Anthorn), United States (Fort Collins), Japan.

•

See the information under “Signal Reception

Troubleshooting” if you experience problems with time

calibration signal reception.

Current Time Setting

This watch adjusts its time setting automatically in

accordance with a time calibration signal. You can also

perform a manual procedure to set the time and date,

when necessary.

•

The ﬁ rst thing you should do after purchasing this

watch is to specify your Home City (the city where you

normally will use the watch). For more information,

see “To specify your Home City”.

•

When using the watch outside the areas covered by the time signal transmitters, you

will have to adjust the current time setting manually as required. See “Timekeeping”

for more information about manual time settings.

•

The U.S. time calibration signal can be picked up by the watch while in North

America. The term “North America” in this manual refers to the area that consists of

Canada, the continental United States, and Mexico.

To specify your Home City

City code

1. In the Timekeeping Mode, hold down

until the city

code starts to ﬂ ash, which indicates the setting screen.

2. Press

(east) and

(west) to select the city code you

want to use as your Home City.

•

Time calibration signal reception is supported when

any one of the city codes shown in the table below is

selected as your Home City.

German/U.K. Signal Japan Signal U.S. Signal

City

Code

City

Name

City

Code

City

Name

City

Code

City

Name

City

Code

City

Name

City

Code

City

Name

LIS Lisbon ATH Athens HKG Hong Kong HNL Honolulu YWG Winnipeg

LON London MOW Moscow BJS Beijing ANC Anchorage CHI Chicago

MAD Madrid TPE Taipei YVR Vancouver MIA Miami

PAR Paris SEL Seoul LAX Los Angeles YTO Toronto

ROM Rome TYO Tokyo YEA Edmonton NYC New York

BER Berlin DEN Denver YHZ Halifax

STO Stockholm MEX Mexico City YYT St. Johns

3. Press

twice to exit the setting screen.

Important!

•

Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive

operation (in the middle of the night). You can also perform manual receive or you

can set the time manually.

•

The watch will receive the time calibration signal automatically from the applicable

transmitter (in the middle of the night) and update its settings accordingly. For

information about the relationship between city codes and transmitters, see “Home

City Codes and Transmitters”.

•

Under factory default settings, auto receive is turned off for all of the following city

codes: HNL (Honolulu), ANC (Anchorage), MOW (Moscow), HKG (Hong Kong), and

BJS (Beijing). For details about turning on auto receive for these city codes, see “To

turn auto receive on and off”.

•

You can disable time signal reception, if you want. See “To turn auto receive on and

off” for more information.

•

See the maps under “Approximate Reception Ranges” for information about the

reception ranges of the watch.

•

If you are in an area that does not use Daylight Saving Time (summer time), turn off

the DST setting.

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive.

•

Auto Receive

With auto receive, the watch receives the time calibration signal automatically up to

six times a day. When any auto receive is successful, the remaining auto receive

operations are not performed. For more information, see “About Auto Receive”.

•

Manual Receive

Manual receive lets you start a time calibration receive operation with the press of a

button. For more information, see “To perform manual receive”.

Produktspecifikationer

Varumärke:	Casio
Kategori:	Titta
Modell:	WV-200E-1AVEF
Timer:	1/1min - 1h
Vikt:	114 g
Stoppur:	Ja
Larmfunktion:	Ja
Klockläge:	12 timmar/24 timmar
Radiosignalmottagare:	DCF/MSF/WWVB/JJY
Batterityp:	CR1620
Batteriets livslängd:	3 År
Antal batterier:	1
Kalender:	Ja
Världstidsfunktion:	Ja
Produktstorlek (BxDxH):	47.7 x 15.2 x 52.2 mm
Boettmaterial:	Rostfritt stål
bandmaterial:	Rostfritt stål
Vattentäthet till ett djup på:	200 m
Klockglas typ:	Mineralglas