Chamberlain CHAA250EVC Bruksanvisning

Chamberlain garageportöppnare CHAA250EVC

Läs gratis den bruksanvisning för Chamberlain CHAA250EVC (116 sidor) i kategorin garageportöppnare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om Chamberlain CHAA250EVC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/116

CHAA250EVC

* For GB (UK, NI) specic information on national regulations and requirements

see English part of the manual.

en Swing Gate Operator Installation Manual*

fr Manuel d‘installation de l‘opérateur de porte battante

nl Installatiehandleiding draaihekaandrijving

de Installationshandbuch für Drehtorantriebe

cs Instalační manuál pro obsluhu křídlové brány

sk Inštalačný manuál k pohonu krídlovej brány

TABLE OF CONTENTS

NOTE:The original installation and operating instructions were compiled in English. Any other available language is a translation of the original English version.

1. SAFETY INSTRUCTIONS AND INTENDED USE......................................................................................................................................................................................2

2. DELIVERY SCOPE......................................................................................................................................................................................................................................4

3. TOOLS NEEDED.........................................................................................................................................................................................................................................4

4. OVERVIEW OF GATE OPERATOR............................................................................................................................................................................................................4

5. MECHANICAL INSTALLATION....................................................................................................................................................................................................................5

5.1 Dimensions of Gate and Operator.........................................................................................................................................................................................................5

5.2 Determine the Position of the Post Bracket...........................................................................................................................................................................................5

5.3 Post Bracket Installation........................................................................................................................................................................................................................6

5.4 Operator Mounting and Travel Distance Adjustment...........................................................................................................................................................................6

5.5 Emergency Release Mechanism..........................................................................................................................................................................................................8

5.6 Control Board Installation and Motor Wiring........................................................................................................................................................................................8

5.7 Power Wiring.........................................................................................................................................................................................................................................8

6. WIRING DIAGRAM......................................................................................................................................................................................................................................9

7. PROGRAMMING..............................................................................................................................................................................................................................................10

7.1 Display, Programming Buttons and Function Setting.........................................................................................................................................................................10

7.2 General Programming Overview..........................................................................................................................................................................................................10

7.3 Wing Movement Direction...................................................................................................................................................................................................................11

7.4 Basic Settings......................................................................................................................................................................................................................................11

7.4.1 Application Settings..................................................................................................................................................................................................................11

7.4.2 Direction Motor 1 Settings.........................................................................................................................................................................................................11

7.4.3 Direction Motor 2 Settings.........................................................................................................................................................................................................11

7.4.4 Limit Learning...........................................................................................................................................................................................................................11

7.5 Stand-by Mode....................................................................................................................................................................................................................................12

7.6 Programming and Erasing of Remote Controls, Radio Accessories and myQ Devices.......................................................................................................................13

7.7 Advanced Settings..............................................................................................................................................................................................................................14

7.7.1 Overview Advanced Settings....................................................................................................................................................................................................14

7.7.2 Transmitter Settings.................................................................................................................................................................................................................14

7.7.3 Infrared Photocells Settings......................................................................................................................................................................................................14

7.7.4 Input Settings...........................................................................................................................................................................................................................14

7.7.5 Partial Opening Motor 1.............................................................................................................................................................................................................15

7.7.6 Delay Motor 2 in Open Direction..............................................................................................................................................................................................15

7.7.7 Delay Motor 1 in Close Direction..............................................................................................................................................................................................15

7.7.8 Timer to Close..........................................................................................................................................................................................................................15

7.7.9 Reversal Time after Impact.......................................................................................................................................................................................................15

7.7.10 E-Lock / Mag-Lock Settings.....................................................................................................................................................................................................15

7.7.10a Relief Motor 1 for E-Lock.......................................................................................................................................................................................................16

7.7.11 Flashing Light Settings...........................................................................................................................................................................................................16

7.7.11a Pre-Flashing................................................................................................................................................................................................................................16

7.7.12 Special Contact Settings.........................................................................................................................................................................................................16

7.7.13 Start Speed in Open and Close Directions.............................................................................................................................................................................16

7.7.14 Maintenance Counter...............................................................................................................................................................................................................16

7.8 Factory Default Settings....................................................................................................................................................................................................................17

7.9 Finish and Exit...................................................................................................................................................................................................................................17

8. BATTERY BACKUP....................................................................................................................................................................................................................................17

9. ERROR CODES........................................................................................................................................................................................................................................17

10. TECHNICAL DATA....................................................................................................................................................................................................................................18

11. MAINTENANCE.......................................................................................................................................................................................................................................19

12. DISPOSAL.........................................................................................................................................................................................................................................19

13. WARRANTY.........................................................................................................................................................................................................................................19

14. DECLARATION OF CONFORMITY............................................................................................................................................................................................................19

Produktspecifikationer

Varumärke:	Chamberlain
Kategori:	garageportöppnare
Modell:	CHAA250EVC
Vikt:	19600 g
Lämplig för:	Universal
Modell:	Elektrisk dörröppnare
Spänning:	230-240 V
Maximal dörrbredd:	2500 mm
Maximal dörrvikt:	200 kg
Enkel installation:	Ja
Temperatur vid drift:	-20 - 55 ° C
Anslutningsteknologi:	Trådlös
Strömkälla av typen:	AC
Dörröppningsvinkel:	120 °
Ändamål:	Ytterdörr
Installationsanvisningar:	Ja
Programstöd:	Ja
Öppethållningsfunktion:	Ja
AC-adapter, inspänning:	24 V
Maximal dörrtjocklek:	1500 mm