Chief HB74P Bruksanvisning
Chief
Projektor tillbehör
HB74P
Läs gratis den bruksanvisning för Chief HB74P (2 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4.5 recensioner. Har du en fråga om Chief HB74P eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
© 2008 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-000114
5/28/08
MODEL: HB-74P Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling
1-800-582-6480.
PARTS
Figure 1:
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Place four nylon spacers on top of projector.
2. Lower custom HB bracket onto spacers on top of projector. Ensure that the side hooks open towards back of the projector. (See Figure 1)
3. Attach HB bracket to projector using four M6 x 16mm Phillips flat head screws through nylon spacers. (See Figure 1)
Continued...
(1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18
(4) SCREW, Phillips Flat Head, M6 x 16mm (4) SPACER, Nylon .50 x .260 x .1875
x 4
x
x 4
x
1
2
Toward front
of projector
I N S T A L L A T I O N I N S T R U C T I O N S
Continued...
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2:
4. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
5. With help of assistants, lift the projector and install it to the four studs extending from the VCM housing. Ensure that the VCM housing is
seated in slots on HB bracket. (See Figure 2)
6. Tighten the four 5/16" flange nuts. (See Figure 2)
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Projektor tillbehör |
| Modell: | HB74P |
Behöver du hjälp?
Om du behöver hjälp med Chief HB74P ställ en fråga nedan och andra användare kommer att svara dig
Projektor tillbehör Chief Manualer
4 Mars 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
Projektor tillbehör Manualer
- Da-Lite
- V7
- Projecta
- Omnitronic
- Peerless
- AV:link
- Metronic
- Newstar
- Auna
- Gravity
- Kingpin Screens
- Elite Screens
- Premier Mounts
- Viewsonic
- Nedis
Nyaste Projektor tillbehör Manualer
27 Mars 2025
27 Mars 2025
21 Februari 2025
31 Januari 2025
31 Januari 2025
29 Januari 2025
10 Januari 2025
7 Januari 2025
27 December 2024
27 December 2024