Chief SLB304 Bruksanvisning
Chief
Projektor tillbehör
SLB304
Läs gratis den bruksanvisning för Chief SLB304 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 8.5 recensioner. Har du en fråga om Chief SLB304 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
8800-002239 Rev00
©2012 Milestone AV Technologies,
a Duchossois Group Company
08/12
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
6436 City West Parkway, Eden Prairie, MN 55344
• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918
I N S T A L L A T I O N I N S T R U C T I O N S
SLB-304 and SLM-304 Interface Brackets
SLB-304 and SLM-304 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific installation instructions
provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
Installation Instructions
WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.
NOTE: Step 1 is only required when installing an SLB interface bracket. If an SLM bracket is being installed, proceed to Step 2.
1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place spacers over threaded inserts in bottom of projector.
4. Place the interface bracket onto the spacers on the bottom of the projector, aligning the mounting holes in the bracket with the spacers
and threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector.
5. Position M5 x 25mm mounting screws through the bracket, spacers and into the threaded inserts. Tighten all fasteners at this time,
securing the bracket to the projector.
NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the
All-Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket (3) Screw, Phillips Flat Head, Machine, M5 x 25mm
(4) 10-24 Thumb Nuts ** (3) Spacer, .5 x .257 x .625
(1) All-Points Security Kit (1) 5/32" Security Hex Key
SLB-304 SLM-304
Towards front
of projector
Towards front
of projector
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Projektor tillbehör |
| Modell: | SLB304 |
Behöver du hjälp?
Om du behöver hjälp med Chief SLB304 ställ en fråga nedan och andra användare kommer att svara dig
Projektor tillbehör Chief Manualer
4 Mars 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
Projektor tillbehör Manualer
- Omnitronic
- Gravity
- BenQ
- Konig & Meyer
- Casio
- Kanto
- Sanus
- Premier Mounts
- Vision
- NeoMounts
- Fromm-Starck
- Sanyo
- InFocus
- Vogels
- Viewsonic
Nyaste Projektor tillbehör Manualer
27 Mars 2025
27 Mars 2025
21 Februari 2025
31 Januari 2025
31 Januari 2025
29 Januari 2025
10 Januari 2025
7 Januari 2025
27 December 2024
27 December 2024