Chief SLM195 Bruksanvisning
Chief
Projektor tillbehör
SLM195
Läs gratis den bruksanvisning för Chief SLM195 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 6 recensioner. Har du en fråga om Chief SLM195 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
I N S T A L L A T I O N I N S T R U C T I O N S
CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However, CSAV makes no claim that the infor-
mation contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the
information contained herein. CSAV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
© 2007 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8802-000264
8/16/07
SLB-195 and SLM-195 Interface Brackets
SLB and SLM series Interface brackets are designed for use with Chief RPA, RPM, and Smart-Lift series projector mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling
1-800-582-6480.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
Installation:
WARNING: OVERTIGHTENING OF SCREWS CAN DAMAGE PARTS AND LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE
TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.
NOTE: Step 1 is only required when installing an SLB Interface bracket. If an SLM bracket is being installed proceed to step 2.
1. Screw six thumb screws onto six 10-24 x 5/8" Philips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place the interface bracket onto the bottom of the projector lining up the four out side holes in the bracket with the four threaded inserts in
the bottom of the projector.
4. Slide the nylon spacer between bracket and the projector, lining it up with the front mounting hole in the bracket.
5. Place the four M4 X 12mm mounting screws and M4 washers in the four out side holes and the M4 X 25mm mounting screw and M4
washer in the front mounting hole and through the nylon spacer by hand, secure all five fasteners at this time.
NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the
All-Points Security Kit.
(1) Interface Bracket (4) Screw, Phillips Pan Head, M4 x 12mm
(6) 10-24 Thumb Nuts ** (1) Screw, Phillips Pan Head, M4 x 25mm
(1) All-Points Security Kit (5) Washer, Flat , M4
(1) Spacer, Nylon, .500" x .257 x .625"
**Only used when installing SLB Interface brackets.
SLB-195
SLM-195
Front of Projector Front of Projector
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Projektor tillbehör |
| Modell: | SLM195 |
Behöver du hjälp?
Om du behöver hjälp med Chief SLM195 ställ en fråga nedan och andra användare kommer att svara dig
Projektor tillbehör Chief Manualer
4 Mars 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
Projektor tillbehör Manualer
- Peerless-AV
- Kingpin Screens
- Omnitronic
- AV:link
- Lindy
- Gravity
- Chipolino
- Unicol
- Premier Mounts
- Panasonic
- Roadinger
- Nedis
- Metronic
- Viewsonic
- Sanyo
Nyaste Projektor tillbehör Manualer
27 Mars 2025
27 Mars 2025
21 Februari 2025
31 Januari 2025
31 Januari 2025
29 Januari 2025
10 Januari 2025
7 Januari 2025
27 December 2024
27 December 2024