Chief SLM520 Bruksanvisning

Läs gratis den bruksanvisning för Chief SLM520 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4.5 recensioner. Har du en fråga om Chief SLM520 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
8802-000100 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-520 H
ANGER
B
RACKET
for Sharp PG-M20X, PG-M25X,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-520 Bracket (3) M3 -16mm Flat Head Screw
(4) 10 - 24 Thumb Nuts (3) 1/2" x .218 x 1/4" Nylon Spacer
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the three ¼” nylon spacers over the three threaded inserts in the bottom of the
projector.
3. Place the SLB-520 bracket onto the three ¼” nylon spacers on the bottom of the projector
lining up the three mounting holes in the bracket with the three nylon spacers.
4. Using the three M3 x 16mm flat head screws, start them into the three threaded inserts
and tighten all fasteners at this time, securing the bracket to the projector. CAUTION:
When attaching the mount be careful not to overtighten screws.
5. See RPA and/or Smart-Lift™ Instructions.

Produktspecifikationer

Varumärke: Chief
Kategori: Projektor tillbehör
Modell: SLM520

Behöver du hjälp?

Om du behöver hjälp med Chief SLM520 ställ en fråga nedan och andra användare kommer att svara dig