Chief SLM553 Bruksanvisning

Läs gratis den bruksanvisning för Chief SLM553 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 4.5 recensioner. Har du en fråga om Chief SLM553 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
8850-000179 08/02/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
INSTALLATION INSTRUCTIONS
SLB-553 HANGER RACKETB
for Epson 53C, 73C,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-553 Bracket (3) M4 -20mm Philips Pan Screws
(4) 10 - 24 Thumb Nuts (1) M4 -20mm Philips counter sink Screws
(3) M4 Flatwasher (4) 1/2" X #10 X 3/8" Nylon Spacer
INSTALLATION INSTRUCTIONS
1. Turn projector upside down.
2. Place the four 3/8” nylon spacers over the four threaded inserts in the bottom of the
projector.
3. Place the SLB-553 bracket onto the four 3/8” nylon spacers on the bottom of the
projector lining up the four mounting holes in the bracket with the four nylon spacers.
4. Using the four M4 x 20mm screws start them into the four threaded inserts using the
countersink screw in the counter sink hole and tighten all fasteners at this time, securing
the bracket to the projector. CAUTION: When attaching the mount be careful not to
overtighten screws.
5. See RPA and/or Smart-Lift™ Instructions.

Produktspecifikationer

Varumärke: Chief
Kategori: Projektor tillbehör
Modell: SLM553

Behöver du hjälp?

Om du behöver hjälp med Chief SLM553 ställ en fråga nedan och andra användare kommer att svara dig