Chief SLM640 Bruksanvisning

Läs gratis den bruksanvisning för Chief SLM640 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om Chief SLM640 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
8802-000047 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-630 H
ANGER
B
RACKET
for Vivitek AV600, Kodak V600, V600Z, Delta AV600,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-630 Bracket (4) 10 - 24 Thumb Nuts
(3) M4 -16mm Screws (3) M4 Flatwashers
(3) ½x .218” x ¼” Nylon Spacer
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the three nylon spacers centered over the three threaded inserts in the bottom of the
projector.
3. Place the SLB-630 bracket onto the three nylon spacers, lining up the three mounting
holes in the SLB-630 bracket with the three threaded inserts and nylon spacers on the
bottom of the projector and secure using the three M4 -16mm mounting screws and M4
Flatwashers.CAUTION: When attaching the mount be careful not to overtighten
screws.
4. See RPA and/or Smart-Lift™ Instructions.

Produktspecifikationer

Varumärke: Chief
Kategori: Projektor tillbehör
Modell: SLM640

Behöver du hjälp?

Om du behöver hjälp med Chief SLM640 ställ en fråga nedan och andra användare kommer att svara dig