Cisco Aironet 1042 Bruksanvisning
Cisco
Åtkomstpunkt
Aironet 1042
Läs gratis den bruksanvisning för Cisco Aironet 1042 (34 sidor) i kategorin Åtkomstpunkt. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Cisco Aironet 1042 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/34

G ETTING S GTARTED UIDE
Cisco Aironet 1040 Series Access Points
1About this Guide
2Safety Instructions
3Unpacking
4Overview
5Configuring the Access Point
6Additional Configuration for the Access Point in Autonomous Mode
7Mounting the Access Point
8Deploying the Access Point on the Wireless Network
9Troubleshooting
10 Declarations of Conformity and Regulatory Information
11 Configuring DHCP Option 43 and DHCP Option 60
12 Access Point Specifications

2
1 About this Guide
This Guide provides instructions on how to install and configure your Cisco Aironet 1040 Series
Access Point. This guide also provides mounting instructions and limited troubleshooting procedures.
2 Safety Instructions
Translated versions of the following safety warnings are provided in the translated safety warnings
document that is shipped with your access point. The translated warnings are also in the Translated
Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the
statement number provided at the end of each warning to locate its translation in the
translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Read the installation instructions before you connect the system to its power source.
Statement 1004
Warning
This product must be connected to a Power-over-Ethernet (PoE) IEEE 802.3af compliant
power source or an IEC60950 compliant limited power source.
Statement 353
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Warning
This product relies on the building’s installation for short-circuit (overcurrent)
protection. Ensure that the protective device is rated not greater than:
20A.
Statement 1005

3
Warning
Do not operate your wireless network device near unshielded blasting caps or in an
explosive environment unless the device has been modified to be especially qualified for
such use.
Statement 245B
Warning
In order to comply with FCC radio frequency (RF) exposure limits, antennas should be
located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.
Statement 332
Caution Do not use the supplied plastic wall anchors to mount the access point on a ceiling
because they will not support the weight of the access point. The fasteners used must be
capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4
indented holes on the low-profile mounting bracket.
Caution This product and all interconnected equipment must be installed indoors within the same
building, including the associated LAN connections as defined by Environment A of the
IEEE 802.af Standard.
Note The access point is suitable for use in environmental air space in accordance with section
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the
Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power
injector in air handling spaces.
Note Use only with listed ITE equipment.
Produktspecifikationer
Varumärke: | Cisco |
Kategori: | Åtkomstpunkt |
Modell: | Aironet 1042 |
Färg på produkten: | Grey, Metallic |
Vikt: | 610 g |
Bredd: | 188 mm |
Höjd: | 28 mm |
Förpackningens bredd: | 275 mm |
Djuppackning: | 220 mm |
Förpackningshöjd: | 65 mm |
LED-indikatorer: | LAN, PoE, Power, WLAN |
Nuvarande: | 1 A |
Placering: | Table, Wall |
Frekvensband: | 2.4 - 2.4835 GHz |
Medföljande kablar: | LAN (RJ-45) |
Snabbstartsguide: | Ja |
Inkluderar AC-adapter: | Ja |
Antal Ethernet LAN (RJ-45)-portar: | 2 |
Certifiering: | CE, FCC |
Anslutning för nätadapter: | Ja |
Ethernet LAN, dataöverföringshastigheter: | 10,100,1000 Mbit/s |
Nätverksstandard: | IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x |
Säkerhetsalgoritmer som stöds: | 64-bit WEP, 128-bit WEP, 802.1x RADIUS, AES, TKIP, WEP, WPA, WPA2, WPA2-AES, WPA2-TKIP |
Antenner kvantitet: | 2 |
Antennförstärkningsnivå (max): | 5 dBi |
Antal användare: | 128 gebruiker(s) |
Förvaringstemperatur: | 10 - 90 °C |
Internera: | Nee |
Firmware-uppgradering möjlig: | Ja |
Webbaserad hantering: | Ja |
Förvaringsfuktighet: | 0 - 95 procent |
Återställningsknapp: | Ja |
Maximal dataöverföringshastighet: | 300 Mbit/s |
2,4 GHz: | Ja |
5 GHz: | Nee |
Power over Ethernet (PoE): | Ja |
Antennfunktioner: | Afneembare antenne |
Antal kanaler: | 13 kanalen |
AC-ingångsspänning: | 12 V |
Drifttemperatur (TT): | -10 - 70 °C |
Relativ luftfuktighet i drift (VV): | 0 - 40 procent |
Behöver du hjälp?
Om du behöver hjälp med Cisco Aironet 1042 ställ en fråga nedan och andra användare kommer att svara dig
Åtkomstpunkt Cisco Manualer
18 Oktober 2024
18 Oktober 2024
14 Oktober 2024
11 Oktober 2024
9 Oktober 2024
8 Oktober 2024
4 Oktober 2024
27 September 2024
21 September 2024
19 September 2024
Åtkomstpunkt Manualer
- Cambium Networks
- DataVideo
- Linksys
- Totolink
- Speco Technologies
- TP Link
- Kingston
- Zebra
- Devolo
- Bosch
- Aerohive
- Macally
- Vimar
- Grandstream
- Allied Telesis
Nyaste Åtkomstpunkt Manualer
9 April 2025
9 April 2025
5 April 2025
2 April 2025
20 Mars 2025
28 Februari 2025
27 Januari 2025
26 Januari 2025
14 Januari 2025
14 Januari 2025