Cisco Aironet 1602E Bruksanvisning
Cisco
accesspunkt
Aironet 1602E
Läs gratis den bruksanvisning för Cisco Aironet 1602E (38 sidor) i kategorin accesspunkt. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2 recensioner. Har du en fråga om Cisco Aironet 1602E eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/38

GETTING STARTED GUIDE
Cisco Aironet 1600 Series Access Points
First Published: December, 2012
Last Updated: March 31, 2015
1 About this Guide
2 Introduction to the Access Point
3 Safety Instructions
4 Unpacking
5 Configurations
6 Access Point Ports and Connectors
7 Configuring the Access Point
8 Mounting the Access Point
9 Deploying the Access Point on the Wireless Network
10 Troubleshooting
11 Declarations of Conformity and Regulatory Information
12 Access Point Specifications

2
1 About this Guide
This Guide provides instructions on how to install and configure your Cisco Aironet 1600 Series
Access Point. The 1600 Series Access Point is referred to as the 1600 series or the access point in this
document.
2 Introduction to the Access Point
The 1600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna
options. The access points support full interoperability with leading 802.11n clients, and support a
mixed deployment with other access points and controllers.
The 1600 series access point is available in controller-based mode and supports:
• Simultaneous single-band or dual-band (2.4 GHz/5 GHz) radios
• Integrated antennas on 1602I access point models (AIR-CAP1602I-x-K9, AIR-AP1602I-UXK9)
• External antennas on 1602E access point models (AIR-CAP1602E-x-K9, AIR-AP1602E-UXK9)
Note The ‘x’ in the model numbers represents the regulatory domain. Model numbers
containing -UX, support the universal regulatory domain. For information on supported
regulatory domains, see “Regulatory Domains” section on page 6.
The features of the 1600 series are:
• Processing sub-systems (including CPUs and memory) and radio hardware which supports:
–
Network management
–
ClientLink 2.0—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients
–
VideoStream
–
Location
–
WIDS/WIPS
–
Security
–
Radio Resource Management (RRM)
–
Rogue detection
–
Management Frame Protection (MFP)
• 32 MB flash size
• 802.11af/at
–
CDP (Cisco Discovery Protocol)
Produktspecifikationer
Varumärke: | Cisco |
Kategori: | accesspunkt |
Modell: | Aironet 1602E |
Vikt: | 860 g |
Bredd: | 221 mm |
Djup: | 221 mm |
Höjd: | 47 mm |
LED-indikatorer: | Ja |
Frekvensband: | 2.4, 5 GHz |
Certifiering: | FCC Bulletin OET-65C\r\nRSS-102 |
Internminne: | 256 MB |
Flashminne: | 32 MB |
Säkerhet: | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 |
Maximal dataöverföringshastighet: | 300 Mbit/s |
2,4 GHz: | Ja |
5 GHz: | Ja |
Antennfunktioner: | Avtagbar antenn |
WAN-port: | Ethernet (RJ-45) |
Produktens färg: | Vit |
Datahastighet för Ethernet-LAN: | 10,100,1000 Mbit/s |
Strömförsörjning via Ethernet (PoE) stöd: | Ja |
Antal LAN (RJ-45) anslutningar: | 1 |
Temperatur vid drift: | 0 - 40 ° C |
Temperaturintervall (förvaring): | -30 - 70 ° C |
Intervall för relativ operativ luftfuktighet: | -10 - 90 % |
AC-inspänning: | 100 - 240 V |
Kryptering/säkerhet: | EAP, EAP-TLS, EAP-TTLS, PEAP, TKIP, WPA, WPA2 |
Växelström Frekvens: | 50 - 60 hz |
Webbaserad adminstraion: | Nej |
Antenn ökningsnivå (max): | 6 dBi |
Kommunikationsstandarder: | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11h, IEEE 802.11n, IEEE 802.3af |
Intern: | Nej |
Efterlever industristandard: | IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d |
Behöver du hjälp?
Om du behöver hjälp med Cisco Aironet 1602E ställ en fråga nedan och andra användare kommer att svara dig
accesspunkt Cisco Manualer
13 Juni 2025
13 Juni 2025
accesspunkt Manualer
Nyaste accesspunkt Manualer
12 Juni 2025
5 September 2024