Clas Ohlson EFP700ET Bruksanvisning
Clas Ohlson
Inte kategoriserad
EFP700ET
Läs gratis den bruksanvisning för Clas Ohlson EFP700ET (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 13 recensioner. Har du en fråga om Clas Ohlson EFP700ET eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
English
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
Ver. 20151117
Digital Timer
Art.no. 36-5837 Model EFP700ET
Please read theentire instruction manual before using theproduct and then
save it for future reference. Wereserve theright for any errors in text or images
and any necessary changes made to technicaldata. Ifyou have any questions
concerning technical problems please contact our Customer Services.
Product description
Digital timer designed for flush mounting inside apattress. Perfect for timer
controlled lighting. Aperfect way to save energy and scare away potential
burglars. Canbe controlled manually or set to random and has a countdown
function which enables you to set the duration of operation.
Up to 20 on/off commands can be programmed per day with 15day
combinations available. Backup battery which saves your settings during
apowercut. Timeand programme are shown on thedisplay, and buttons
are protected to prevent buttons being pressed unintentionally.
Buttons and functions
Installation
1. Cut thepower to thepattress by removing thefuse at theconsumer unit
or turning off themainpower. Ensure that thewires going to thepattress
are notlive.
• SU (Sunday)
• MO, WE, FR
• TU, TH, SA
• SA, SU
• MO, TU, WE
• TH, FR, SA
• MO, TU, WE, TH, FR
• MO, TU, WE, TH, FR, SA
1. When theclock is displayed, press [ PROG ] to select asettingmode.
2. “1” starts flashing and “ON” will display.
3. Press [ + ] repeatedly to select one of theother 19 on/off modes or
continue to step 4below.
4. Press [ PROG ] again and “MO” will begin flashing on thedisplay.
5. Use [ + ] and [ - ] to select theday(s) according to thelistabove.
6. Press [ PROG ] again and thehour will begin flashing on thedisplay.
Use [ + ] and [ - ] to set thehour.
7. Press [ PROG ] again and theminutes will begin flashing on thedisplay.
Use [ + ] and [ - ] to set theminutes.
You have now set the “ON” time for programme 1 (e.g. turning on alight)
and can continue to set the “OFF” time (e.g. turning off alight).
8. Press [ PROG ] again so that “1” starts flashing and “OFF” is displayed.
9. Repeat steps 3 to 5 to set thenext “ON”time.
Repeat theinstructions above to set programmes 2 to 20, or press [
] to
exit theprogrammingmode.
Note:
• If no button is pressed, theprogramming mode will end automatically
after 10 seconds and thetimer will return to clockmode.
• If [ + ] or [ - ] are held, thespeed of setting thetime will increase.
• In programming mode [ PROG ] disables thetimers other functions.
• You can press any of thefour corner buttons to delete/restore your
programme while programming.
• The programme does not have to be deleted, the time can be
temporarily deactivated, (e.g. during the summer) like this:
1. Press [ PROG ] to enter the programming mode.
2. Press [ + ] or [ - ] repeatedly to advance to the ON time which is
to be deactivated.
3. Press one of the four corner buttons once to deactivate the ON time
or the OFF time. The display shows:
when the ON/OFF time
is deactivated.
4. The ON time can be reactivated in the same way.
Random activation
This function means that thetimer turns ON or OFF randomly between
18:00 and 06:00 thefollowingday. Thisis suitable for turning lights on and
off to simulate a “lived-in home”.
1. Press [ RND ] in clock mode to active therandom on/off function.
Thesymbol “RND” is displayed.
2. Thetimer will now switch on for 10–26 minutes, and off for 26–42 minutes.
3. Other functions are disabled when thetimer is in randommode.
4. This function is repeated daily until you switch it off by pressing [ RND ].
Countdown function
Using thecountdown function you can set atime until switchoff.
1. In clock mode, press [ CD ] to activate thecountdown function.
Theminutes display will begin flashing.
2. Press [ + ] or [ - ] to select thenumber of minutes. Press [ CD ]again.
Thehour display will start toflash.
3. Press [ + ] or [ - ] to select thenumber ofhours.
4. Press the [ CD ] button again to exit thetime setting and to start
thecountdown.
When thefunction is activated “CTD” will flash on thedisplay. Oncethetimer
has counted down to zero, theappliance/light that is connected will switch
off, and theCTD symbol will goout.
Note:
• To temporarily pause thecountdown, press [ CD ]once. “CTD” will stop
flashing. Press [ CD ] again to resume thecountdown.
• Thecountdown can be set from 1 minute up to 99 hours and 59minutes.
• Once thecountdown is complete, theCTD symbol disappears and
thetext “OFF” appears to show that thetimer is turnedoff.
• You can press any of thefour corner buttons at any time to cancel
thecountdown and return to theclockmode.
Turning On/Off Manually
Thetimer can also be turned on and off manually, which can be useful if alight
needs to be switched on outside of its programmed times, for example.
With thecoveropen
1. In clock mode, press [ ] once to switch between on/offmode.
“ON” or “OFF” will be displayed depending on whether thetimer is on
oroff.
2. Press any of the4 buttons in corners of thecontrol panel (thebuttons
that are depressed by thecover when it is closed).
3. Press [
] again to return to clockmode.
With thecover closed
Press thecover to manually turn thetimer on oroff.
Daylight saving setting
In theclock mode, press [ + ] to activate thedaylight saving setting.
Theclock moves forward one hour and “+1” is displayed.
Care and maintenance
Cleaning
Wipe thetimer with adry cloth if needed. Useamild detergent – never use
asolvent or strong, abrasive detergent, as this may damage theproduct.
Factoryreset
If thetimer is not functioning normally, or if you
need to delete all settings, use anappropriate
implement and gently press and hold [ R ] until
thedisplay shows:
Changing thebattery
Thetimer’s backup battery is located at therear of thecontrol panel and can
be removed by following theinstructions in . Remove theold battery Installation
and insert anewone. Takenote of thepolarity markings.
Responsible disposal
[ R ] Press to reset to factory settings.
[
]
Thesymbol refers to thesymbol on thecontrol panelcover.
When thecover is closed: manual switching on/off. Pressto
manually switch thetimer on or off, regardless of thecurrent
programme.
When thecover isopen: also to clear and retain settings
when programming. Pressany of the4 buttons in corners of
thecontrol panel (thebuttons that are depressed by thecover
when it is closed).
[ PROG ] Selects theprogrammingmode.
[ RND ] Activates random switching on/off.
[ CD ] Activates countdown to switchoff.
[
]
On/off mode and clock settingmode.
[ + ] Settings button. Pressto activate daylight savingsetting.
[ - ] Settings button.
[
]
Clock setting.
2. Release thetimer control panel
and frame from theelectronics
unit by gripping theframe
or control panel and pulling
straightout.
3. Insert 2×1.5 V (LR44,SR44)
batteries. Follow themarkings
above and below thebattery
compartment to ensure correct
polarity. Thebatteries power
thedisplay and should be
changed when thedisplay
becomesdim.
4. Connect thewires to theelectronics
unit as shown in thepicture.
5. Fit theelectronics unit into
thepattress and tighten
the mounting screws.
6. Assemble thecontrol panel
together with theframe and
press them carefully into
theelectronicsunit. Ensure that
thethree connector pins are
inserted into theelectronics unit
without being damaged.
7. Connect thepower/replace
thefuse andtest.
Setup
Setting theclock
1. Press [ ] to activate theclock setting.
2. Press or hold [ + ] and [ - ] to set theday. Press [
] and thehour willflash.
3. Press or hold [ + ] and [ - ] to set thehour. Press [
] and theminutes
willflash.
4. Press or hold [ + ] and [ - ] to set theminutes. Press [
] to confirm and
finish setting theclock.
Setting aprogramme
Up to 20 on/off events per day can be programmed. Theprogrammes can be
set for individual days of theweek, or in combinations of more than oneday:
• MO, TU, WE, TH, FR, SA, SU (every day)
• MO (Monday)
• TU (Tuesday)
• WE (Wednesday)
• TH (Thursday)
• FR (Friday)
• SA (Saturday)
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout theentire EU. In order to prevent any harm to
theenvironment or health hazards caused by incorrect waste
disposal, theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible manner.
When recycling your product, take it to your local collection
facility or contact theplace of purchase. They will ensure
that theproduct is disposed of in anenvironmentally sound
manner.
Specifications
Rated voltage 230V AC, 50 Hz
Max.load 1800W (resistive)
Batteries 2×1.5 V (LR44, SR44)
The control panel
is concealed by
acover. The cover
also acts as a push-
button for controlling
the time switch
manually. Thecover
is designed to be
difficult to open
without tools.
Itshould not be
able to be opened
unintentionally.
Itthus prevents
thesettings from
being altered
by children or
unauthorised
persons. The cover
can be opened
using a small
screwdriver.
Produktspecifikationer
| Varumärke: | Clas Ohlson |
| Kategori: | Inte kategoriserad |
| Modell: | EFP700ET |
Behöver du hjälp?
Om du behöver hjälp med Clas Ohlson EFP700ET ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Clas Ohlson Manualer
12 Oktober 2024
22 September 2024
19 September 2024
17 September 2024
8 September 2024
7 September 2024
4 September 2024
2 September 2024
30 Augusti 2024
24 Augusti 2024
Inte kategoriserad Manualer
- Topaz
- Smit Visual
- BYD
- Hagor
- Meade
- Kingston
- Artusi
- Carcomm
- SEB
- Arebos
- Rossmax
- Pivo
- Brother
- Hidrate
- DAB
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025