Clas Ohlson SY-M30W Bruksanvisning


Läs gratis den bruksanvisning för Clas Ohlson SY-M30W (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om Clas Ohlson SY-M30W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
English
GREAT BRITAIN customer service tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
Ver. 20160301
Solar Panel
Art.no 36-6222 Model SY-M30W
36-6223 SY-M80W
Please read theentire instruction manual before using theproduct
and save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technical data.
contact Customer Services.
Product description
Thesolar panel has polycrystalline cells which generate electricity
when exposed to light.
Assembly
Note:
As soon as thesolar panel is exposed to light or sunlight,
the terminals in theconnection box will be live. To avoid short
circuits when assembling and connecting solar panels, turn them
away from thelight or cover them so that they are not producing
electricity during theactual connection procedure. Remove
thecovering when all theconnections have been made.
Always mount thepanel on astraight, flat surface; do not bend
or twist thepanel.
Never attempt to divide or disassemble thepanel.
Avoid drilling or welding theframe whenever possible.
Do not use any sharp metal tools or any other things that can
scratch thesurface of thepanel.
Install thepanel horizontally or vertically with theconnection box
at thetop. Thesolar panel should be facing south and at anangle
of 30–40° (summer), 0–20° (winter). Bear in mind that if thesolar
Choose alocation for thepanel with as little shade as possible.
Mount thepanel in such away that air can circulate freely around
it. Use stainless steel fasteners to attach thepanel. For easy
installations, use Clas Ohlson’s solar panel mount 36-4490.
Connection
30 W
Use suitable cable, preferably UV-resistant 1.5–4 mm², depending
on thelength of cable and size of panel. Open theconnection box
by unscrewing and removing thelid. Thread thecable through
thecable clamp. Carefully check thepolarity markings
on theterminal block and connect thepositive and negative
wires accordingly.
80 W
Use suitable cable, preferably UV-resistant 1.5–4 mm², depending
on thelength of cable and size of panel. Open theconnection box
by carefully releasing thetabs with ascrewdriver.
Thread thecable through thecable clamp. Carefully check thepolarity
marking on theterminals and connect thepositive and negative
wires. There are polarity markings next to thecable clamp screws.
1. Connection block 30 W
2. Negative terminal and
connection
3. Positive terminal and
connection
4. Connection block 80 W
5. Negative terminal and connection
6. Positive terminal and connection
Handy hint
Coat thewires and terminal posts with Vaseline to protect them
from corrosion. Make sure that thecable clamp is tightened.
Close thelid of theconnection box tightly to prevent moisture from
entering. If thesolar panel is to be mounted in acoastal area, it is
extra important to protect theinstallation from moisture to prevent
saltwater corrosion.
Thesolar panel should be connected to abattery system via
acharge regulator. See Clas Ohlson’s product range.
If more than one panel is used, they can be connected in either
series or parallel.
To connect 2 solar panels
in a12 V system: Connect
them in parallel by connecting
thepositive to thepositive and
thenegative to thenegative.
To connect 2 solar panels
in a24 V system: Connect
them in series by connecting
thepositive of one panel to
thenegative of thenext panel.
Responsible disposal
Connections for 12 V or 24 V systems
This symbol indicates that this product should not
be disposed of with general household waste. This
applies throughout theentire EU. In order to prevent
any harm to theenvironment or health hazards
caused by incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial can be
disposed of in aresponsible manner. When recycling
your product, take it to your local collection facility
or contact theplace of purchase. They will ensure
that theproduct is disposed of in anenvironmentally
sound manner.
Specifications
Model SY-M30W SY-M80W
Cell type Polycrystalline Polycrystalline
Max. power 30 W 80 W
Max. voltage 17.6 V 17.6 V
Max. current 1.71 A 4.55 A
Idling voltage 22.0 V 22.0 V
Short-circuit current 1.81 A 4.84 A
Max. system voltage 600 V 600 V
Size (L × W × H) 460 × 510 × 30 mm 835 × 670 × 35 mm
Note: Thesolar panels have individual rating plates and their
specifications might differ slightly from theabove example.
4
6
5
32
1


Produktspecifikationer

Varumärke: Clas Ohlson
Kategori: Inte kategoriserad
Modell: SY-M30W

Behöver du hjälp?

Om du behöver hjälp med Clas Ohlson SY-M30W ställ en fråga nedan och andra användare kommer att svara dig