Conair InfinitiPRO CS2000 Bruksanvisning
                    Conair
                    
                    Inte kategoriserad
                    
                    InfinitiPRO CS2000
                
                                
    Läs gratis den bruksanvisning för Conair InfinitiPRO CS2000 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7.5 recensioner. Har du en fråga om Conair InfinitiPRO CS2000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/4
                    
                    
                    
COPPER
SERIES
INSTRUCTIONS 
AND STYLING 
GUIDE 
For your safety 
and continued 
enjoyment of 
this product, 
always read the 
instruction book 
carefully before 
using.
1 IN. DIGITAL COPPER 
FLAT IRON
model CS2000
IMPORTANT SAFETY 
INSTRUCTIONS
When using electrical appliances, especially 
when children are present, basic safety 
precautions should always be taken, 
including the following:
READ ALL INSTRUCTIONS 
BEFORE USING
KEEP AWAY  
FROM WATER
DANGER – Any appliance is
electrically live even when the switch is off. 
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where
it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or
other liquids.
5. If an appliance falls into water, unplug it  
immediately. Do not reach into the water.
WARNING – To reduce the risk of
burns, electrocution, fire, or injury to persons: 
1. This appliance should never be left
unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by,
on or near children or individuals with
certain disabilities.
4. Use this appliance only for its intended
use, as described in this manual. Do not use 
attachments not recommended by the 
manufacturer. 
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped,
damaged, or dropped into water. Return
the appliance to an authorized service
center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping or drowsy.
8. Never drop or insert any object into
any opening.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or 
where oxygen is being administered.
10. Unit is hot when in use. Do not let heated
surfaces touch eyes or skin.
11. Do not place the heated unit directly
on any surface while it is hot or 
plugged in. 
12. Never block the air openings of the
appliance or place it on a soft surface, such 
as a bed or couch, where the air openings 
may be blocked. Keep the air openings free 
of hair, lint and other debris.
13. Do not use an extension cord with
this appliance.
14. Do not touch hot surfaces of the
appliance. Use handles or knobs.
15. Do not attempt to touch the housing of
your appliance near the straightening plates,
as it is hot when in use.
16. Do not use with a voltage converter.
17. This appliance is not a toy. Keep away
from children.
SAVE THESE 
INSTRUCTIONS
OPERATING 
INSTRUCTIONS
This flat iron is intended for household use. 
Use on Alternating Current (60 hertz) only. 
This unit is designed to be operated at 120 
volts AC.
This appliance has a polarized plug (one 
blade is wider than the other). As a safety 
feature, this plug will fit in a polarized outlet 
only one way. If the plug does not fit fully in 
the outlet, reverse the plug. If it still does not 
fit, contact a qualified electrician. Do not 
attempt to defeat this safety feature.
NOTE: Do not use this styling appliance on 
hair extensions.
Never leave your flat iron on and unattended. 
However, should you fail to turn the unit off,  
it will shut itself off automatically within  
60 minutes.
which lose heat during use. This provides 
consistent styling power so that every strand 
of your hair is set with the same level of  
heat and comes out the same way for a 
perfect finish.
The iron’s unique high temperature settings 
and Instant Heat technology provide styling 
versatility for all hair types. If you have fine 
hair, a low temperature will provide the best 
results. If you have thick, wavy or hard-to-
straighten hair, keep the heat setting on high. 
You can vary the iron’s temperature 
according to your particular need by  
selecting the desired temperature setting.
STYLING WITH THE NEW  
EASY-GLIDE, FLOATING  
COPPER-INFUSED CERAMIC PLATE
The easy-glide copper-infused ceramic 
coating is one of the latest and best 
technological advances in hair appliances. 
The copper-infused ceramic plates deliver 
even heat for the ultimate in silky, shiny, 
healthy-looking hair. You’ll find that hair 
glides easily over the surface of the plates as 
you’re straightening and that it is easier to 
clean styling product residue, etc., off the 
plates after each use. The copper-infused 
ceramic coating also helps smooth down 
flyaways. Your new straightening iron has one 
plate designed with a little give to “float.” 
This provides better contact with hair, 
eliminating gaps, for straighter results.
INSTANT HEAT TECHNOLOGY
This flat iron features a powerful ceramic 
heater that maintains high temperatures 
during use for precision styling. It heats up 
quickly to the temperature you’ve selected 
for your hair type.
This Instant Heat technology has 21 variable 
temperature settings. There is a temperature 
range that’s gentle and safe for every type  
of hair, from the finest to the curliest, to help 
you create the look you want. Conair’s 
professional salon standards of engineering 
provide you with a uniform and improved 
heat recovery system that maintains the  
iron at constant temperatures. There is a 
constant surge of power to ensure that heat 
is continuously and quickly delivered for 
optimal styling results, unlike other units, 
Recommended Heat Guide
LE HAIR TYPED TEMP. CONTROL
265 Fº – 355°F Fragile Hair
365 Fº – 375°F Fine Hair
380 Fº – 400°F Medium Hair
410 Fº – 420°F Thick Hair
430 Fº – 450°F Coarse Hair
GETTING STARTED
Plug in the unit and slide the ON/OFF switch 
to the ON position. The default temperature 
setting of 355°F will appear on the LED 
display. Select a suitable temperature setting 
for your hair type by turning the temperature  
dial clockwise to increase the heat or 
counterclockwise to decrease the heat.  
The desired temperature setting will blink 
until the desired temperature is reached. 
Slide power ON/OFF switch to the OFF 
position to turn off unit.
WARNING: The flat iron’s copper-infused 
ceramic plates will get very hot within a 
few seconds and should not come into 
contact with the skin after the flat iron 
has been turned on. 
GET TO KNOW YOUR FLAT IRON
TO STRAIGHTEN HAIR
Hair should be clean and completely  
dry before using the flat iron. For best  
results, use a light styling product before 
blow-drying hair.
1. Start with a hair section that is 1½ inches
wide and no more than ½ inch thick.
2. Open the iron and place the hair section
between the two hot plates, close to the
scalp. Trap hair between the plates by firmly
squeezing the handles together.
3. While maintaining the tension, slowly pull
the unit down along the hair section toward 
the ends. At the ends, release the pressure 
on the handle and allow the hair to slide out.
4. Repeat the process on additional sections
of hair until you achieve the hairstyle you 
desire. It may be necessary to repeat the 
process on certain areas, depending on the 
texture of your hair.
Some experience is necessary when learning 
to use this flat iron. After using the iron 
several times, you will learn the ideal way to 
straighten and style your hair.
ADD VOLUME AND SHAPE
To add flips and waves, secure ends in 
between plates and wrap hair around the 
outer housing. Turn your wrist up or under to 
create flips, add curl or more body. It’s an 
easy way to add shape to straight styles.
USER 
MAINTENANCE
Your flat iron is virtually maintenance free.  
No lubrication is needed. Keep all vents and 
openings clear of dirt and dust. If cleaning 
becomes necessary, disconnect the unit from 
the power source, allow it to cool and wipe 
exterior with a cloth. If any abnormal 
condition occurs, unplug the unit, allow it to 
cool, and return it for repair to an authorized 
service representative only. No repairs should 
be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be 
pulled, twisted, or severely bent. Never wrap 
the cord tightly around the appliance. Damage 
will occur at the high flex point of entry into 
the appliance, causing it to rupture and short 
circuit. Inspect the cord frequently for damage. 
Stop use immediately if damage is visible or if 
unit stops or operates intermittently.
STORAGE
When not in use, your iron is easy to store. 
Allow appliance to cool, then simply store  
out of reach of children in a safe, dry 
location. Do not jerk or strain cord at plug 
connections. Do not wrap the line cord 
around the appliance. Allow the cord to hang 
or lie loose and straight at the point of entry 
into the appliance.
FEDERAL COMMUNICATIONS 
COMMISSION NOTICE
WARNING: Changes or modifications to this 
unit not expressly approved by the party 
responsible for compliance could void the 
user’s authority to operate the equipment. 
This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions: (1) This device may not 
cause harmful interference, and (2) This 
device must accept any interference received, 
including interference that may cause 
undesired operation.
NOTE: This equipment has been tested and 
found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. 
This equipment generates, uses and can 
radiate radio frequency energy and, if not 
installed and used in accordance with the 
instructions, may cause harmful interference 
to radio communications. However, there 
is no guarantee that interference will not 
occur in a particular installation. If this 
equipment does cause harmful interference 
to radio or television reception, which can 
be determined by turning the equipment 
off and on, the user is encouraged to try to 
correct the interference by one or more of 
the following measures: 
• Reorient or relocate the receiving antenna. 
• Increase the separation between the
equipment and receiver. 
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected. 
• Consult the dealer or an experienced radio/
TV technician for help.
SUPPLIER’S DECLARATION OF 
CONFORMITY
Brand: InfinitiPRO by Conair
®
Model No.: CS2000
Description: Flat Iron 
Responsible Party: Conair Corporation, 
1 Cummings Point Road, Stamford, CT 06902 
(203) 351-9000
Standards: FCC Part 15 Subpart B,  
ANSI C63.4-2014 
This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions: 
(1) This device may not cause harmful
interference, and (2) This device must
accept any interference received, including
interference that may cause undesirable
operation.
DATE OF ISSUE: XX/XX/XXXX
WARNING:
IF YOU THINK THE 
POWER IS OFF WHEN 
THE SWITCH IS OFF,
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are 
a dangerous combination. But did you know 
that an electric appliance is still electrically 
live even if the switch is off? If the plug is in, 
the power is on. So when you are not using 
your appliances, keep them unplugged.
ALWAYS UNPLUG 
SMALL APPLIANCES
LIMITED FIVE-YEAR WARRANTY 
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your 
unit free of charge for 60 months from the  
date of purchase if the appliance is defective  
in workmanship or materials.
To obtain service under this warranty, return the 
defective product to the service center listed 
on back, together with your purchase receipt. 
California residents need only provide proof of 
purchase and should call 1-800-3-CONAIR for 
shipping instructions. In the absence of a purchase 
receipt, the warranty period shall be 60 months 
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR 
LIABILITIES, INCLUDING BUT NOT LIMITED TO 
THE IMPLIED WARRANTY OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, 
SHALL BE LIMITED IN DURATION TO THE 
60-MONTH DURATION OF THIS WRITTEN, 
LIMITED WARRANTY. Some states do not allow
limitations on how long an implied warranty lasts, 
so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR 
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 
DAMAGES FOR BREACH OF THIS OR ANY 
OTHER WARRANTY, EXPRESS OR IMPLIED, 
WHATSOEVER. Some states do not allow the 
exclusion or limitation of special, incidental, or 
consequential damages, so the above limitation 
may not apply to you.
This warranty gives you specific legal rights, and 
you may also have other rights, which vary from 
state to state.
BEAUTY TIPS:
To achieve the looks you love and for more 
great InfinitiPRO by Conair
®
products visit infiniti.conair.com
Service Center 
Conair Corporation 
Service Department 
7475 N. Glen Harbor Blvd. 
Glendale, AZ 85307
Please register this product at
www.conair.com/registration 
For information on any Conair product, call 
1-800-3-CONAIR or visit us on the web at
www.conair.com
©2021 Conair Corporation 
21PA079455
IB-17338
Produktspecifikationer
| Varumärke: | Conair | 
| Kategori: | Inte kategoriserad | 
| Modell: | InfinitiPRO CS2000 | 
Behöver du hjälp?
Om du behöver hjälp med Conair InfinitiPRO CS2000 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Conair Manualer
                        
                         28 December 2024
                        
                    
                                                            
                        
                         27 December 2024
                        
                    
                                                            
                        
                         27 December 2024
                        
                    
                                                            
                        
                         27 December 2024
                        
                    
                                                            
                        
                         27 December 2024
                        
                    
                                                            
                        
                         27 December 2024
                        
                    
                                                            
                        
                         27 December 2024
                        
                    
                                                            
                        
                         26 December 2024
                        
                    
                                                            
                        
                         26 December 2024
                        
                    
                                                            
                        
                         10 December 2024
                        
                    
                                                            Inte kategoriserad Manualer
- Volkswagen
- Massive
- G-Technology
- Grundfos
- Hamax
- Westfalia
- DAB
- Pure
- Legends
- LevelOne
- Ovation
- Britax-Romer
- BeamZ
- Lawn Star
- BabyHome
Nyaste Inte kategoriserad Manualer
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025