Cotech 36-8196 Bruksanvisning
Cotech
Inte kategoriserad
36-8196
Läs gratis den bruksanvisning för Cotech 36-8196 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7 recensioner. Har du en fråga om Cotech 36-8196 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
UNITED KING DOM •
www.clasohlson.co.uk
1 2 3
5
4
Ver. 20220715
RGB Floor Lamp
Art.no 36-8196 Model LUM-FLD20X110W08BK-01B
Read theentire instruction manual before use and
save it for future reference. We apologise for any
text and picture errors and any changes of technical
data. If you have any questions concerning technical
problems please contact our Customer Services.
Safety
Warning
• Neither theproduct nor its mains adapter may
be dismantled or modified in any way.
• Never use theproduct or themains adapter
if it is in any way damaged or malfunctioning.
Unplug theproduct immediately if it is damaged.
• Do not use theproduct in explosive
atmospheres or in thepresence of flammable
liquids or gases.
• The product must only be connected to
theincluded mains adapter.
• Never connect several or other types of devices
to themains adapter.
• The product must not be installed on awet or
electrically conductive surface.
• Make sure that thecables are not damaged
whilst theproduct is being installed.
• Always unplug themains adapter from thewall
socket when theproduct is not in use.
• Do not carry theproduct using themains lead
and do not use it for other unsuitable purposes.
• Never let children play with theproduct.
• The product may be used by persons with
reduced physical, sensory or mental capabilities
or persons with alack of experience or
knowledge which could jeopardise their safety,
provided they have been instructed in thesafe
operation of theproduct and understand
thehazards involved.
Potentially hazardous optical radiation.
Never look directly at thelight source.
The product is not suitable for illuminating
aroom.
The product is intended for indoor use only.
Class II mains adapter.
Class III strip light
1. Screw theLED light fitting onto thebase (only
finger-tight).
2. Connect theLED light fitting to thecontrol box.
Note: Make sure that theconnectors are joined
and aligned correctly, with thearrows pointing
towards each other. Otherwise thelight will not
work.
3. Connect theconnecting cable to thecontrol box.
4. Plug themains adapter into asuitable electrical
outlet.
5. Note: Pull out theplastic film tab protruding from
thebattery compartment of theremote control.
Assembly
Functions
Note: Make sure there are no obstacles between
the IR receiver on the control box and the remote
control.
Important
• The LED light sources cannot be replaced.
When theLEDs have reached theend of
their service life, theentire product must be
discarded.
• This product is intended only for private use.
Auto
Flash
Jump
Meters
IC Set
CS
C3
C7
C16
W/WW
Care and maintenance
• Unplug themains lead from thewall socket
before cleaning.
• The product should be cleaned using adry cloth
or vacuum cleaner.
Responsible disposal
This symbol indicates that theproduct
should not be disposed of with general
household waste. This applies throughout
theentire EU. In order to prevent
possible damage to human health and
theenvironment caused by improper waste disposal,
at theend of its service life theproduct should be
taken to anappropriate recycling facility so that
thematerial can be disposed of in aresponsible
manner. Take theused product to your local waste
management facility or theplace of purchase.
They will ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Mains adapter
Power supply 230 V AC, 50 Hz
Output 12 V, 1 A DC
Strip light
Dimensions Ø 200 mm×H 1100 mm
Light source 30×LED
Rated voltage 12 V DC
Rated power 6.6 W
Remote control
Range Max 5 m
Battery 1×CR2025 (included)
• Switch on/off
• Select warm white or cool white
Colour selector buttons
• 1 colour at a time
• 7 colours
• 3 colours (R, G, B)
• 16 colours
Colour selection can be combined with other functions.
Number of lit LEDs / Brightness
Press [ IC Set ] and use [ ] and [ ] to gradually
turn off or turn on three LED lights at a time.
Increase or decrease the brightness
Fluctuating functions
Switches between all colours and programmes
The LED lights move from one end to theother
Slow flashing
Intensive flashing
A group of LED lights moves from one end to
theother where they form arow and move on
Specific direction light effect selection
The LED lights move from the middle
out towards the ends.
The LED lights move from the ends in
towards the middle.
21 LED lights move from one end to
the other
12 LED lights move from one end to
the other
The LED strip light lights up one light
at a time from one end to the other,
extinguishes, and then starts again.
21 LED lights form a group and then
move together in a row along the
strip light.
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Inte kategoriserad |
| Modell: | 36-8196 |
Behöver du hjälp?
Om du behöver hjälp med Cotech 36-8196 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Cotech Manualer
18 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
15 September 2024
12 September 2024
1 September 2024
Inte kategoriserad Manualer
- Belkin
- Pattfield
- Morris
- KitchenAid
- Arkon
- Global
- Hecht
- Digital Forecast
- Essenza
- Cherub
- Stirling
- Gaslock
- Brilliant
- NeoMounts
- Byron
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025