Cotech E0003HA-B3V-YX Bruksanvisning
Cotech
Väderstation
E0003HA-B3V-YX
Läs gratis den bruksanvisning för Cotech E0003HA-B3V-YX (6 sidor) i kategorin Väderstation. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6 recensioner. Har du en fråga om Cotech E0003HA-B3V-YX eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
1
2
3
4
Ver. 20171211
Temperature Sensor
Art.no 36-6726 Model E0003HA-B3V-YX
36-6726-1 E0003HA-B3V-YX
Please read theentire instruction manual before using theproduct
and then save it for future reference. Wereserve theright for
any errors in text or images and any necessary changes made
to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services.
Safety
• Thetemperature sensor must not be dismantled or
modified in anyway.
• Thebatteries should be removed from thetemperature sensor
if it is not to be used for anextended period, otherwise they
might leak and damage thesensor. Neverleave discharged
batteries in thebattery compartment.
• Do not expose thetemperature sensor to impacts.
NOTE:
Do not mix old and new batteries or batteries of
differenttypes.
Do not mix alkaline, regular or rechargeable batteries.
Care and maintenance
Clean theproduct using alightly moistenedcloth. Useonly
mild cleaning agents, neversolvents or corrosive chemicals.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by
incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial
can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your
local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Buttons and functions
1. LED indicator
(flashes
when data is
being sent to
thethermo meter
unit)
2. Wall bracket
3. Channel selector
4. Battery
compartment
Synchronising thesensor with aweather station/
thermometer (main unit)
1. Press and hold in [ CH/ ] on themain unit (sold separately) until ▲
thesignal icon begins toflash. Themain unit will begin searching for
theoutdoor sensor.
2. ] repeatedly until thedesired channel appears on Press [ CH/▲
thedisplay of themainunit.
- Choose CH 1 if channel 1 has been selected on thetemperature sensor.
- Choose CH 2 if channel 2 has been selected on thetemperature sensor.
- Choose CH 3 if channel 3 has been selected on thetemperature sensor.
3. After ashort moment, thereadings from thesensor will appear on
thedisplay of themainunit.
• Themain unit should receive data from thesensor and display the temperature
within 3 minutes of thebatteries having been inserted in both devices.
• Refer to theTroubleshooting section if there is aproblem.
Troubleshootingguide
Nothing
appears on
thedisplay of
themainunit.
• Check thebatteries in themain unit and sensor/s.
Temperature
from outdoor
sensor not
displayed.
• Check that thedistance between thethermometer
and sensor does not exceed 30m.
• Make sure that thedevices are located at least 2m
from monitors and TVsets.
• Avoid placing thedevices on or close to window
frames made ofmetal.
• Avoid using electronic devices such as loudspeakers
which operate at thesame frequency (433MHz),
close to thedevices.
• Check thebatteries in thethermometer and any
connected sensors.
• Remove thebatteries, wait awhile and then reinsertthem.
Displayed
temperature
is incorrect.
• Remove thebatteries, wait awhile and then reinsertthem.
• Make sure that thedevices are not affected by heat
sources or air-conditioning units andsuch.
Specifications
Installation
Batteries and channel selection
1. Slide thebattery cover downwards in thedirection of
thearrow to access thebattery compartment.
2. Insert 2×AAA/LR03 batteries (sold separately) observing
thepolarity markings in thebattery compartment.
3. Channel selection:
- Set thechannel selector to position 1 if only one sensor is
to be used with your thermometer/weather station.
- Set thechannel selector to position 2 if you are already
using one sensor with your thermometer/weather station.
- Set thechannel selector to position 3 if you are already
using two sensors with your thermometer/weather station.
4. Click thebattery cover back intoplace.
Placement
1. Place thesensor in alocation that is protected from direct
sunlight andrain.
2. Mount thesensor at least 2.5 m above ground, if possible.
3. Screw ascrew into asuitable mounting surface and hang
thesensor on it using thewall bracket (2). Batteries 2×AAA/LR03
(sold separately)
Update interval 60seconds
Frequency 433MHz
Range 30m
Size 38×100×18mm
Weight 30g
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Väderstation |
| Modell: | E0003HA-B3V-YX |
Behöver du hjälp?
Om du behöver hjälp med Cotech E0003HA-B3V-YX ställ en fråga nedan och andra användare kommer att svara dig
Väderstation Cotech Manualer
3 September 2024
24 Augusti 2024
21 Augusti 2024
10 Augusti 2024
Väderstation Manualer
- Ventus
- Braun
- EMOS
- Techno Line
- Ease Electronicz
- OBH Nordica
- Konyks
- ChiliTec
- Renkforce
- Hesdo
- Xeecom ApS
- Marquant
- EQ-3
- Ea2 LABS
- PeakTech
Nyaste Väderstation Manualer
2 April 2025
27 Mars 2025
27 Mars 2025
5 Mars 2025
27 Februari 2025
15 Februari 2025
5 Februari 2025
27 Januari 2025
27 Januari 2025
12 Januari 2025