Cres Cor H138WS1834D Bruksanvisning


Läs gratis den bruksanvisning för Cres Cor H138WS1834D (6 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10.5 recensioner. Har du en fråga om Cres Cor H138WS1834D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSUA...D & H138WS18...D Series
Humidity Holding Hot Cabinet
5925 Heisley Road Mentor, OH 44060-1833
Insulated
Hot Cabinets
FL-2355
Rev. 5 (11/15) Page 1 of 6
Call Toll-free: 877-CRES COR (273-7267) Fax: 800-822-0393 www.crescor.com
Model No. Volts Watts Amps Hertz Phase NEMA
H137WSUA12D*
H137WSUA5D*
H137WSUA6D*
H138WS185D*
H138WS1834D*
H138WS1816D*
120 2000 16.7 60 1 5-20P
H137WSUA12D208
H137WSUA5D208
H137WSUA6D208
H138WS185D208
H138WS1834D208
H138WS1816D208
208 2000 9.6 60 1 6-15P
H137WSUA12D240
H137WSUA5D240
H137WSUA6D240
H138WS185D240
H138WS1834D240
H138WS1816D240
240 2000 8.3 60 1 6-15P
*Model numbers ending in sufx 15A are 1500W, 12.5 Amps, 5-15P.
NOTE: The above model numbers are basic models.
They may include letters: E, L, M, P S, U. V, Z, HTor ending with and/or .
HOW TO INSTALL UNIT:
1. Place cabinet on level oor, in a well ventilated area.
2. Unpack and install inner pan slides parts.
3. Plug cord end into proper wall outlet.
Air is VERY HOT when door is opened.
WARNING
1. Push the switch on; the light will come on.
NOTE: The letters “LOTPR” (Low Temperature)
will show on the control panel until it
reaches 80°F (26°C).
2. Turn the control knob to show 22F. Push the
knob to set the temperature. Run the unit for one
(1) hour.
3. Push the switch off the unit off and let cool.
4. Wipe the inside clean with detergent and hot water.
FIRST TIME OPERATION:
NOTE: A new cabinet needs toburn off
manufacturing oils and excess adhesive
before its rst use. Do NOT load food into
cabinet until this has been done!
HOW TO CHANGE FROM °C TO °F (if needed)
1. Push the switch on; the light will come on.
2. Push and hold the “SET” button and the button in
the lower left hand corner together for 5 seconds.
You are now entered into the menu.
3. Scroll over the”Unit” and change it to “C” , then
scroll to the “END”.


Produktspecifikationer

Varumärke: Cres Cor
Kategori: ej kategoriserat
Modell: H138WS1834D

Behöver du hjälp?

Om du behöver hjälp med Cres Cor H138WS1834D ställ en fråga nedan och andra användare kommer att svara dig