Crestron HD-TX1-F Bruksanvisning

Crestron Wifi-repeater HD-TX1-F

Läs gratis den bruksanvisning för Crestron HD-TX1-F (2 sidor) i kategorin Wifi-repeater. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 13 recensioner. Har du en fråga om Crestron HD-TX1-F eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

quickstart guide

HD-TX and HD-RX Series

www.crestron.com

Specifications subject to

change without notice.

For Regulatory Compliance information, refer to

the latest version of Doc. 6860.

QUICKSTART DOC. 6861D (2025032) 08.16

HDMI® Fiber-Optic Transmitters and Receivers

The HD-TX and HD-RX Series consist of the following models:

• HD-TX1-F transmitter and HD-RX1-F receiver

• HD-TX3-F transmitter and HD-RX3-F receiver

1Introduction

HD-TX1-F Front Panel Connections

Connecting the HDMI IN Port: Using an HDMI cable (not

supplied), connect the HDMI IN port to the HDMI output port of

the audio/video source.

Connecting the Control Ports: Connect the IR IN or COM

control port or both as follows:

• Using an IR cable (not supplied), connect the 2-pin IR IN:

terminal block of the IR IN port to the IR output port of the

control system.

• : Using a data communications cable (not COM (RS-232)

supplied), connect the 3-pin terminal block to the COM port

of the control system.

HD-RX1-F Front Panel Connections

Connecting the HDMI OUT Port: Using an HDMI cable (not

supplied), connect the HDMI OUT port to the HDMI input port of

the receiving device.

Connecting the Control Ports: Connect the IR OUT or COM

control port or both as follows:

• : Using the CrestronIR OUT ®

IRP2 emitter (not supplied),

connect the 2-pin terminal block of the IR OUT port to the

IR input port of the device to be controlled.

• : Using a data communications cable (not COM (RS-232)

supplied), connect the 3-pin terminal block to the COM port

of the device to be controlled.

HD-TX1-F and HD-RX1-F Rear Panel Connections

Connecting the Ground: Connect the chassis ground lug to

earth ground (building steel).

Connecting the MM OPTICAL Fiber Port: Using a CresFiber

or other quality 50/125 μm or 62.5/125 μm simplex multimode

fiber-optic cable with SC connectors, connect one end of the

cable to the MM OPTICAL connector on the HD-TX1-F and the

other end of the cable to the MM OPTICAL connector on the

HD-RX1-F.

NOTE: For maximum distance, the fiber-optic

cable should be rated for at least 500 MHz*km

effective modal bandwidth (EMB) at both 850 nm

and 1300 nm. Refer to the cable manufacturer’s

datasheet for EMB information.

Connecting the 12 Vdc Power Jack:

Connect the 12 Vdc power jack to the

PW-1205RU external power supply included

with the HD-TX1-F and HD-RX1-F.

3HD-TX1-F and HD-RX-1 Connections

HD-TX and HD-RX Series

Mount the transmitter and receiver onto a wall or rack as

appropriate for your installation.

Wall Mounting

Using four mounting screws (not supplied), attach the

transmitter or receiver to the wall as shown below.

Rack Mounting

Mount the transmitter or receiver to the front or rear rail of a

rack as follows:

1. Position either the left or right mounting flanges of the

device so that the holes align with the holes in the rack

(mounting of right flanges is shown below).

2. Secure the device to the rack using two rack mounting

screws (not supplied).

2Mounting

(4) Mounting screws

(not supplied)

Rack mounting

screws

(not supplied)

HD-TX1-F Front Panel Connections

COM

GND

HDMI OUT

IR OUT

S G

Display

HD-RX1-F Front Panel Connections

GND

HDMI IN

IR IN

S G

COM

source

Control

system

HD-TX1-F Rear Panel Connections HD-RX1-F Rear Panel Connections

MM OPTICAL

0.5A

12VDC

CLASS 1

LASER

PRODUCT

USB port

(for factory

use only)

MM OPTICAL

0.5A

12VDC

CLASS 1

LASER

PRODUCT

Fiber-optic cable

USB port

(for factory

use only)

Ground Ground

Power

supply

Power

supply

Produktspecifikationer

Varumärke:	Crestron
Kategori:	Wifi-repeater
Modell:	HD-TX1-F
Färg på produkten:	Zwart
Vikt:	550 g
Bredd:	156 mm
Djup:	103 mm
Höjd:	40 mm
Snäll:	Dockingstation
Typ av anslutningskontakt:	3,5 mm
Anslutningsteknik:	Bedraad
Medföljande kablar:	HDMI, Power, USB
Inkluderar AC-adapter:	Ja
Antal USB 2.0-portar:	5
Förvaringstemperatur:	-20 - 60 °C
Minsta systemkrav:	Windows: 10+; macOS: 11.5+; Linux: Ubuntu 14.04+; Android: 5.0+; Chrome OS: R55 Build+
Drifttemperatur (TT):	0 - 40 °C