Crestron TSW-760-LB-B Bruksanvisning

Crestron Inte kategoriserad TSW-760-LB-B

Läs gratis den bruksanvisning för Crestron TSW-760-LB-B (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om Crestron TSW-760-LB-B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

TSW-760-LB/TSW-1060-LB

Room Availability Light Bar for TSS-7/TSW-760 & TSS-10/TSW-1060

Installation Guide

Description

The Crestron® TSW-760-LB and TSW-1060-LB are room availability light bars for the

Crestron TSS-7/TSW-760 and TSS-10/TSW-1060 touch screens, respectively. When the

light bar is installed onto a touch screen as part of an enterprise room scheduling solution,

the light bar illuminates to indicate the room’s availability.

Additional Resources

Visit the product pages on the Crestron

website ( ) for additional www.crestron.com

information and the latest rmware

updates. Use a QR reader application on

your mobile device to scan the QR image.

6. Use the removed screws to attach the mounting bracket and light bar to the

electrical box.

NOTE: Pull the ex circuit attached to the light bar through the opening in the

mounting bracket after the light bar and mounting bracket are installed.

Illustrations depicting U.S.-style and European-style installations are shown below.

U.S.-Style Installation

European-Style Installation

Light bar

assembly

Screw (2):

4-40 x 3/8 in

USB connector

Touch screen

USB port

4. Remove the touch screen mounting bracket from the electrical box:

a. For U.S.-style installations, unscrew the four 6-32 x 3/4 in screws.

b. For European-style installations, unscrew the four M3 x 16 mm screws.

c. For U.K.-style installations, unscrew the two M3 x 25 mm screws.

5. Align the light bar with the electrical box.

Installation

To install the TSW-760-LB and TSW-1060-LB light bars:

1. If the light bar is being added to an existing touch screen installation, pull the touch

screen carefully out its mounting bracket and disconnect the Ethernet cable.

NOTE: If the touch screen is secured to the mounting bracket with a security

latch, refer to the removal procedure described in the

TSW-560/TSW-760/TSW-1060 DO Guide (Doc. 7926) or the TSS-7/TSS-10

DO Guide (Doc. 8326) at .www.crestron.com/manuals

2. Use the two included 4-40 x 3/8 in screws to attach the light bar assembly to the

rear of the touch screen.

3. Insert the assembly’s USB connector into the USB port on the rear of the touch

screen.

TSW-760-LB TSW-1060-LB

Touch screen

mounting bracket Light bar

2-gang

U.S. electrical box

Flex circuitScrew (4): 6-32 x 3/8 in

Touch screen

mounting bracket Light bar

2-gang European

electrical box

Flex circuitScrew (4): M3 x 16 mm

Produktspecifikationer

Varumärke:	Crestron
Kategori:	Inte kategoriserad
Modell:	TSW-760-LB-B
Färg på produkten:	Black, Brown
Vikt:	16500 g
Bredd:	290 mm
Djup:	310 mm
Höjd:	1030 mm
Användarmanual:	Ja
Anslutningsteknik:	Bedraad
Genomsnittlig effekt:	180 W
Plug and play:	Ja
Rekommenderad användning:	Universeel
Impedans:	8 Ohm
Ljudutgångskanaler:	2.0 kanalen
Högtalarplacering:	Vloer
Antal förare:	3
Bashögtalare:	Nee
Diameter drivrutin:	170 mm
Frekvensomfång:	22 - 52000 Hz
Känslighet:	92 dB
Typ av högtalare:	2.5-weg
Högtalarhölje:	Gesloten
Diameter högtonenhögtalare:	30 mm
Antal diskantdrivrutiner:	1
Antal mellanklassförare:	2
RMS power högtalare:	320 W
Tweeter:	Ja
Crossover frekvens:	3200 Hz