Crestron Vector CD1595 Bruksanvisning

Crestron högtalare Vector CD1595

Läs gratis den bruksanvisning för Crestron Vector CD1595 (8 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13 recensioner. Har du en fråga om Crestron Vector CD1595 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

APPLICATION NOTE

DOC 8370A (2052535)

09.18

Certain Crestron products contain open source software. For specific information, visit

www.crestron

www.crestronwww.crestron.com/lega

.com/lega

.com/lega.com/legal/open

l/open

l/openl/open-

-- -

sourc

sourcsource

ee soft

soft

softsoftware

ware

wareware

Crestron, the Crestron logo, Avia, and Vector are either trademarks or registered trademarks of Crestron Electronics, Inc., in the UnitedCrestron States and/or other countries. Neutrik and

speakON are either trademarks or registered trademarks of Neutrik AG in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in

this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron i s not

Page 1 8 of

Crestron Performance Audio Systems: Powersoft Amplifiers

Powersoft Duecanali and Quattrocanali power amplifiers— - - - -CA PWRSFT 1604 and CA PWRSFT 2404,

respectively—are designed to meet the high-power requirements of large audio systems. Both amplifiers offer

a range of applications from basic background music and paging, to larger sound reinforcement systems in

auditoriums, meeting places and other large gathering spaces.

These amplifiers are extremely versatile and may be used in low impedance performance systems. The

compact, 1 RU housing and supplied mounting rails for 19’’ racks simplify installation while addressing space

concerns. For high-impedance distributed systems, refer to Application Note (Doc. 8371) at

www.crestron.com/manuals.

For additional amplifier wiring and operational details, refer to the CA- - - - PWRSFT 1604 and CA PWRSFT 2404

product manual at www.crestron.com/manuals.

Connections

To accommodate a variety of applications each

amplifier includes several terminal block

connectors. Depending on the attached

loudspeaker, additional connectors may be required

for terminations at the loudspeaker end.

Configurations

Each channel on a Powersoft amplifier can be

independently configured for high-impedance

(Hi- - -Z) distributed systems or low impedance (Lo Z)

operation.

The amplifiers are configured for operations using

DIP switches on the rear panel. Additional DIP

switches configure High-Pass Filters (HPF) on each

channel.

WARNING:

WARNING:WARNING: To prevent damage to system

components, ensure that the amplifier is powered

off prior to changing any DIP switch setting.

NOTE

NOTENOTE:

:: Refer to the product manual for details on

wiring and additional DIP switch configurations.

Select Low Impedance Operation

All amplifier channels are

factory- -Z configured for Lo

operation. Additionally, the

high-pass filter is disabled

(HPF Off

HPF Off

HPF OffHPF Off) and the gain is set

to 32 dB. To set a channel for

low-impedance operation,

the channel mode switch

must be set to Lo

LoLo-Z

-Z

-Z-Z.

Set Gain

The CA- -1604 PWRSFT

and CA- -PWRSFT 2404

have four amplifier gain

settings. The gain level

is set from the GAIN

section of the CONFIG

DIP switches.

Depending on the

capabilities of the

headend equipment driving the amplifier, you may

choose to modify the amplifier’s input sensitivity.

Most contemporary audio systems include a DSP

upstream of the amplifier input. The DSP’s analog

output gain settings are configured to achieve

operational levels aligned with amplifier gain to

prevent the DSP or amplifier from distorting the

signal.

The amplifier should have sufficient Maximum

Power per channel to meet or exceed the

loudspeaker’s power rating.

Produktspecifikationer

Varumärke:	Crestron
Kategori:	högtalare
Modell:	Vector CD1595
Vikt:	27800 g
Bredd:	700 mm
Djup:	700 mm
Förpackningens vikt:	33400 g
Förpackningens bredd:	530 mm
Djuppackning:	670 mm
Förpackningshöjd:	745 mm
Höjd (min):	1200 mm
Höjd (max):	1340 mm
Maximal viktkapacitet:	200 kg
Antalet hjul:	5 wiel(en)
Ramfärg:	Zilver
Antal per paket:	1 stuk(s)
Ergonomisk design:	Ja
siffra:	1
Rammaterial:	Aluminium
Färg botten:	Zilver
Produkter per pall:	12 stuk(s)
Typ produkt:	Gaming leunstoel
Tiltvinkelområde:	90 - 120 °
Hjulhjul:	Ja
Max användarvikt:	200 kg
Kraangat:	700 x 700 mm
Nackstöd:	Ja
Wieldiameter:	75 mm
Spelplattformar stöds:	Universeel
Grundmaterial:	Aluminium
Typ av stol:	Zitgedeelte van mesh
Färg på sätet:	Zwart
Typ av ryggstöd:	Netrugleuning
Ryggstödets färg:	Zwart
Armstöd:	Ja
Justerbart armstöd:	Ja
Armstödsjusteringstyp:	2D-armleuning
Inklusive racinghjul/flygläge:	Nee
Zitbreedte:	510 mm
Zitdiepte:	510 mm
Justerbart nackstöd:	Ja
Sitthöjd (max):	565 mm
Sitthöjd (min):	480 mm
Ryggstödsmaterial:	Mesh, Polyvinyl chloride (PVC)
Sitsmaterial:	Polyvinyl chloride (PVC)
lutningsjusteringar:	Ja
Gaslyftsklass:	4
Ryggstödets bredd:	500 mm
Armstödshöjd (min):	240 mm
Armstödshöjd (max):	280 mm