CRUX CS-BMW6 Bruksanvisning

CRUX Backkamera CS-BMW6

Läs gratis den bruksanvisning för CRUX CS-BMW6 (12 sidor) i kategorin Backkamera. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 4.5 recensioner. Har du en fråga om CRUX CS-BMW6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
With OE type Dynamic Parking Guide Lines
On-screen display and setup
2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,
rear-view camera, reverse gear)
Rear-view camera input
Front camera input
Front camera input can also be used as an Auxiliary Video Input
Automatic switching to rear-view camera input on engagement of reverse gear from all
operation modes
Forced rear-view camera option (only on vehicles with PDC button)
Manual return from rear-view and front camera (cancellation of automatic switching)
Picture-in-picture mode combining after-market rear-view and front camera picture(s)
with factory parking sensor graphics
Compatible wi all factory video accessories (e.g. rear-view camera, DVD-changer, etc.) th
Plug & Play installation
For the F-series BMW with NBT navigation system or radio, 6.5”, 7”, 8.8” or 10.25”
monitor and 4+2pin HSD2 LVDS connector.
On i3 installations, part# HAR-i3 is required to install the interface. The interface module
is installed/mounted under the rear seat and you will need to run the HAR-i3 towards
the rear seat.
CS-BMW6 Module
CS-BMW6 Harness
4+2 PIN HSD2 LVDS Cable
Power/CAN Harness
1 / 12
rev.060519


Produktspecifikationer

Varumärke: CRUX
Kategori: Backkamera
Modell: CS-BMW6

Behöver du hjälp?

Om du behöver hjälp med CRUX CS-BMW6 ställ en fråga nedan och andra användare kommer att svara dig