CRUX RVCCH-75F Bruksanvisning
CRUX
Inte kategoriserad
RVCCH-75F
Läs gratis den bruksanvisning för CRUX RVCCH-75F (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13 recensioner. Har du en fråga om CRUX RVCCH-75F eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
RVCCH-75F
Front & Rear Camera Integration Interface for
CHRYSLER, DODGE, FIAT & MASERATI Vehicles with Uconnect 8.4 or 4.3” Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.121420
1 of5
- Adds front and rear camera inputs.
- Front camera automacally shows on the screen aer changing the gear from reverse to drive.
- Programmable for front camera delay turn OFF me using the OSD menu.
PRODUCT FEATURES:
PARTS INCLUDED:
RVCCH-75F Module LVDS CableRVCCH-75F Harness
LVDS Video Extension Board OSD Control Pad 4 Wire Taps
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.121420
2 of 5
WIRING DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Front Camera Input
Rear Camera Input
To OSD Control Pad
Front/Rear Camera +12V Power
Ground
Green = Rear Camera Manual Trigger*
Blue = Front Camera Manual Trigger*
RVCCH-75F
MODULE
MAIN
*Use these wires if not using CAN Trigger.
Green wire = Connect to Reverse Light +12V
Blue wire = Connect to +12V using a toggle switch
VIDEO
LVDS Video
Extension Board
To Radio
From OEM Screen
Factory 22 pin connector
Red = +12V to pin 12 (Red)
Black = Ground to pin 1 (Black)
Brown/White = CAN + to pin 6 (Gray/Dark Blue)
Brown = CAN - to pin 17 (Gray/Yellow)
RVCCH-75F
LVDS & MAIN HARNESS CONNECTION:
Front & Rear Camera Integration Interface for
CHRYSLER, DODGE, FIAT & MASERATI Vehicles with Uconnect 8.4 or 4.3” Systems
Refer to the diagram above for wire connecons for power and CAN communicaon for the RVCCH-75F. Tap the
wires to the white factory 22 pin connector. Factory color wires are listed on the diagram above. Use the wire taps
include in the kit.
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.1214203 of 5
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCCH-75F
DIP SWITCH SETTINGS:
8.4” Screen
4” Screen
OSD Control Pad
The OSD Seng Screen automacally pops up when the OSD Control Pad is connected.
ON SCREEN DISPLAY (OSD) SETTINGS:
Front & Rear Camera Integration Interface for
CHRYSLER, DODGE, FIAT & MASERATI Vehicles with Uconnect 8.4 or 4.3” Systems
Produktspecifikationer
| Varumärke: | CRUX |
| Kategori: | Inte kategoriserad |
| Modell: | RVCCH-75F |
Behöver du hjälp?
Om du behöver hjälp med CRUX RVCCH-75F ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad CRUX Manualer
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
Inte kategoriserad Manualer
- Dresden Elektronik
- Creative
- Louis Tellier
- Everdure
- Crucial
- DBX
- Moultrie
- Peltor
- Jacuzzi
- Cayin
- Vemer
- Veho
- Goki
- IHome
- Kruidvat
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025