CRUX RVCGM-80C Bruksanvisning
CRUX
Inte kategoriserad
RVCGM-80C
Läs gratis den bruksanvisning för CRUX RVCGM-80C (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 8.5 recensioner. Har du en fråga om CRUX RVCGM-80C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
RVCGM-80C
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
1 of 8
- Automacally switches to rear-view when vehicle is put in reverse gear.
- Provides reverse camera input.
- Adds 3 Audio/Video inputs.
- Plug and play installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
RVCGM-80C
Module
Remote Control Power Harness
IR Extension Cable LVDS Cable A/V Cable
Camera Power Harness Push Buon Switch
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
2 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80C
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
INSTALLATION DIAGRAM:
AV1
AV2
LVDS
Output
AV3
AV OUT
+12V ACC
GROUND
Fuse Box
Connect to Blue
Mini USB Plug from
HMI Module
Plug to HMI
Module
RGB CABLE
IR REMOTE CABLE
PUSH BUTTON SWITCH
CAMERA POWER
+12V GROUND
DIP SWITCHES
Sig tli e
REAR-VIEW INTEGRATION
RVCGM-80C
24-PIN
POWER PLUGSTATUS LED
24-Pin
Audio/Video
IN/OUT
GM-80C LVDS
T-HARNESS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
3 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80C
Follow these steps to properly install the interface module. Note that this interface connects to the HMI Module.
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
INSTALLATION INSTRUCTIONS:
1. Remove the GLOVE BOX to gain access to the factory HMI module. The HMI module is located in dierent areas
depending on the vehicle model. Below is a list of vehicles and where the HMI module can be located:
Cadillac ATS/CTS = below the glove box
Cadillac SRX = below or behind the glove box
Corvee = driver side kick panel
Once you have located the HMI module, unplug the BLUE LVDS connector. You will need to plug this to the
RVCGM-80C Main Interface Module.
Factory LVDS
Connector
2. Using the provided 24-Pin Power Harness, connect the loose wires on the 24-Pin as menoned below. You can
tap Accessory power from the cigaree lighter (+12V switched) posion.
NOT ALL LOOSE WIRES ON THE
24-PIN CONNECTOR ARE USED Factory Mini USB (LVDS)
connecons are mostly
located on the MyLink
System box.
RED = Accessory
BLACK = Ground
BLUE = Parking
GRAY = Reverse Input
3. Aer making the connecons on the 24-Pin harness, insert the 24-Pin into the Main Interface module. Make
sure that the connector is properly seated into the module.
Produktspecifikationer
| Varumärke: | CRUX |
| Kategori: | Inte kategoriserad |
| Modell: | RVCGM-80C |
Behöver du hjälp?
Om du behöver hjälp med CRUX RVCGM-80C ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad CRUX Manualer
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
Inte kategoriserad Manualer
- Newland
- Cocraft
- Crem
- Berkel
- Bravilor Bonamat
- Jocel
- BMAX
- Snoes
- Lionelo
- Soler & Palau
- Glem Gas
- Imetec
- Zaahn
- Starlink
- Roccat
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025