CRUX RVCMZ-72 Bruksanvisning
Sidor 1 Engels Inte kategoriserad
Läs bruksanvisningen för CRUX RVCMZ-72 gratis online eller ladda ner PDF:en. 17 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
RVCMZ-72
Rear View Integration with Lip Mount Camera
for Select Mazda Vehicles
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.1103201 of 1
- Automacally switches to rear-view when vehicle is in reverse gear.
- Includes universal lip mounted camera.
- Plug and play installaon.
PRODUCT FEATURES:
INSTALLATION DIAGRAM:
Installing the Camera
NOTE: Test the camera for funconality prior to nalizing the installaon.
1. Remove the rear panel between the Mazda emblem and license plate using a panel removal tool.
2. Drill a 5/8” size hole in the locaon.
3. Fish the camera cable through the drilled hole into the trunk area.
4. Remove the factory radio to gain access to the connectors.
5. Route the camera cable towards the radio and mke the power and video connecons. Tap the red wire from the camera
cable (coming out of the yellow RCA) to the red wire of the RVCMZ-72 harness. The red wire (near the camera) is NOT used.
Insulate it to prevent it from shorng. Tap the ground wire (black) near the camera to a solid chassis ground. If for some
reason video noise is present, the RVCMZ-72 provides a ground wire which can then be used to ground the camera instead of
using chassis ground. See diagram for reference.
VEHICLE APPLICATIONS:
2013 - 2015 CX-5
2007 - 2012 CX-7
2007 - 2015 CX-9
2011 - 2015 Mazda6
PHONE
SETUP
SEEK
SEEK
Factory
Radio
AUDIO
NAV
VOLTUNE/FILE
4-Pin
(Female Plug)
Video
Connection
WHITE**
Parking Line
Cut = OFF / Connect = ON
BLUE
(not used
keep connected)
**NOTE: Changes to the parking line option
will take eect after a power cycle.
Camera Power
Regulator
*Camera Ground
(to chassis)
Red wire
Not Used (Insulate)
Make sure the arrows
line up and push in
the connectors well.
*Ground “A”
*NOTE on Grounding the Camera:
If video noise is present when using chassis ground,
run a wire from Ground “A” to the camera ground instead.
PARTS INCLUDED:
RVCMZ-72 HarnessCUL-04 Camera20 . Extension Cable
Mazda (with factory screen)
Produktspecifikationer
| Varumärke: | CRUX |
| Kategori: | Inte kategoriserad |
| Modell: | RVCMZ-72 |
Behöver du hjälp?
Om du behöver hjälp med CRUX RVCMZ-72 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad CRUX Manualer
CRUX RVCGM-80B Bruksanvisning CRUX RVCGM-80F Bruksanvisning CRUX RVCPR-66K Bruksanvisning CRUX RVCPR-66 Bruksanvisning CRUX AUX-ABMP1 Bruksanvisning CRUX USB-3.5 Bruksanvisning CRUX RVCLR-68B Bruksanvisning CRUX UC-1 Bruksanvisning