CRUX SWRHK-65S Bruksanvisning

Läs gratis den bruksanvisning för CRUX SWRHK-65S (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 9 recensioner. Har du en fråga om CRUX SWRHK-65S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev. 081022

SWRHK-65S

Radio Replacement with Steering Wheel Retention for

HYUNDAI and KIA Vehicles with ISO Connectors

1 of 2

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

-Retains factory features in select Hyundai and Kia vehicles while functioning with an aftermarket radio.

-Retains factory 3.5mm Aux Input Jack (if equipped).

-Pre-programmed to retain factory Steering Wheel Controls.

-Includes Hyundai/Kia antenna adapter.

-EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SWRHK-65S MODULESWRHK-65S HARNESSANTENNA ADAPTERSWC CABLE

AFTERMARKET

RADIO

SWC

MODULE

illumination (+)Orange

Vehicle Speed SensorPink

Antenna Turn ONBlue

+12V ConstantYellow

+12V ACCRed

GroundBlack

Right Front (+)Gray

Right Front (-) Gray/Black

Left Front (+)White

Left Front (-) White/Black

Right Rear (+)Violet

Right Rear (-) Violet/Black

Left Rear (+)Green

Left Rear (-) Green/Black

Audio Signal from 3.5mm Jack Aux-InRed & White RCA

12-Pin Black

Connector

Note:

Output signal(s) stated above may not cover all Year/Model.

HYUNDAI/KIA ANTENNA

ADAPTOR (Included)

TO FACTORY

HARNESS

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

AFTERMARKET

RADIO SELECTOR

(See Chart)

HYUNDAI / KIA TYPE

SWC SETTING

(OFF OFF ON ON)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

4-Pin

Connector

Insulate with

tape if not used

Blue/Yellow (Kenwood & JVC)

Produktspecifikationer