CRUX VRFBM-77i Bruksanvisning
CRUX
Inte kategoriserad
VRFBM-77i
Läs gratis den bruksanvisning för CRUX VRFBM-77i (11 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 5 recensioner. Har du en fråga om CRUX VRFBM-77i eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/11
BMW
2015 2016 i3* –
With OE type Dynamic Parking Guide Lines
On-screen display and setup
2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC rear-view camera, ,
reverse gear)
Rear-view camera input
Front camera input
Front camera input can also be used as an Auxiliary Video Input
Automac switching to rear-view camera input on engagement of reverse gear from all operaon modes
Forced rear-view camera opon (only on vehicles with PDC buon)
Manual return from -view and front camera (cancellaon of automac switching) rear
Picture- -picture mode combining aer-market rear-view and front camera picture(s) with factory parking in
sensor graphics
Compable with all factory video accessories (e.g. rear-view camera, -changer, etc.) DVD
Plug & Play installaon
For the BMW i3 with navigaon system or radio and 6.5”, 7”, 8.8” or 10.25” monitor with 4+2pin HSD2
LVDS connector
The interface is installed under the glove compartment and the radio headunit is located under the rear
seat.
BM-77i Module
BM-77i Harness
4+2 PIN HSD2 LVDS Cable
Power/CAN Harness
i3-HAR
1 / 11
Rev.1128 16
2 / 12
Rev.1128 16
Seng the DIP switches of the Interface B . ox
DIPs 1 and 2 on the back of the interface-b used to set the monitor size. DIP 3 must be set to OFF.ox is
Vehicle/ Navigaon
Dip 1
Dip 2
Dip 3
6.5“ monitor.
OFF
OFF
No funcon
7“ monitor
OFF
OFF
No funcon
8.8“ monitor
ON
OFF
No funcon
10.25“ monitor (ver.1)
ON
OFF
No funcon
10.25“ monitor (ver.2)
ON
ON
No funcon
Aer each change of the DIP switch sengs you have to execute a power reset of the interface box!
Connecng Interface box a harnesses nd
Remove the rear seat and locate the Radio Headunit. Unplug the Quadlock connector from the Radio
Headunit.
Plug factory Quadlock connector into the BM-77i T-harness female Quadlock connector
Connect the male Quadlock connector of the BM-77i T-harness to the female Quadlock connector o f
the Radio Headunit.
Run the i3-HAR along the passenger side door sill from the Radio Headunit towards the glove
compartment and plug it into the Power/CAN harness .
Connect the female 12pin AMP connector of the Power/CAN harness to the front side of the - VRFBM 77i
interface box.
3 / 12
Rev.1128 16
1
2
3
4
5
Produktspecifikationer
| Varumärke: | CRUX |
| Kategori: | Inte kategoriserad |
| Modell: | VRFBM-77i |
Behöver du hjälp?
Om du behöver hjälp med CRUX VRFBM-77i ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad CRUX Manualer
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
Inte kategoriserad Manualer
- Savio
- Cyber Acoustics
- Aquatica
- Deye
- POGS
- Motorola
- Roccat
- Radio Flyer
- Broil King
- Winia
- Palson
- Kiev
- Ventus
- Stiga
- Be Quiet!
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025