Ctek D250TS Bruksanvisning
Ctek
Batteriladdare
D250TS
Läs gratis den bruksanvisning för Ctek D250TS (7 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4.5 recensioner. Har du en fråga om Ctek D250TS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
EN
EN • 3
MANUAL
CONGRATULATIONS
Congratulations on purchasing your new CTEK professional 24V DC/DC switch mode battery
charger, 12V converter and battery equalizer. This charger is part of a range of professional bat-
tery chargers from CTEK SWEDEN AB. It represents the latest technology in battery charging with
charging and analysis in 4 steps with temperature compensation.
Read this User Manual and follow the instructions carefully before using your new charger.
SAFETY
• The charger is designed for 24V lead-acid batteries mounted into vehicles.
Do not use the charger for any other purpose
• Use safety glasses when connecting or disconnecting a battery.
• Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin
or eyes. Seek medical advice.
• Make sure that the cables are not being pinched or in contact with warm surfaces
or sharp edges.
• While charging, a battery can emit explosive gases, avoid sparks in the immediate area.
• Always provide for proper ventilation during charging.
• Avoid covering the charger.
Starter Battery
24V+
Service Battery
24V+
Service ground Service Battery Midpoint
D250TS
The D250TS has one 24V input and two alternating outputs. One output charge a 24V
battery and the other provides 50% of the input voltage to the midpoint of a 24V system. This
enables connection of 12V consumers to the battery string and also equalizing this battery
string, for longer battery life.
D250TS
FEATURES:
• Multi-step10A temperature compensated battery charging and battery maintenance.
• Battery separation of Starter and Service batteries.
• Equalization of Service batteries
• Makes connection of 12V consumers directly to 24V Service battery possible.
• When the charger is correctly connected the charger will output 24V on the status signal wire.
Connection of a 24V lamp (max 2W) to the status signal wire will indicate a correctly con-
nected charger.
• The charger will maintain the starter battery untill the supply is below 14V. To avoid draining the
service battery always connect a charger to the service battery when the vehicle is not used for
a longer period.
+IN +OUT
EQU
D250TS
Status signal wire
Temperature sensor
20015884C D250TS, Manual, Print file 002.indd 3 2011-12-20 13:27:12
Produktspecifikationer
| Varumärke: | Ctek |
| Kategori: | Batteriladdare |
| Modell: | D250TS |
Behöver du hjälp?
Om du behöver hjälp med Ctek D250TS ställ en fråga nedan och andra användare kommer att svara dig
Batteriladdare Ctek Manualer
22 September 2024
12 September 2024
12 September 2024
12 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
Batteriladdare Manualer
- Traxxas
- Speed-Link
- NOCO
- Truper
- Verbatim
- Steren
- Nitecore
- Scosche
- Projecta
- Maktec
- Bracketron
- Hyundai
- Eufab
- Interphone-Cellularline
- Lindy
Nyaste Batteriladdare Manualer
15 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
9 Oktober 2025
5 Oktober 2025
5 Oktober 2025
3 Oktober 2025