Ctek MXS 10 Bruksanvisning

Ctek Batteriladdare MXS 10

Läs gratis den bruksanvisning för Ctek MXS 10 (9 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Ctek MXS 10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

EN • 3

MANUAL

SAFETY

•Thechargerisdesignedforchargingonlybat-

teriesaccordingtothetechnicalspecication.

Donotusethechargerforanyotherpurpose.

Alwaysfollowbatterymanufacturers'userand

safetyrecommendations.

•Nevertrytochargenon-rechargeablebatteries.

•Neverplacethechargerontopofthebattery

orcoverthechargerwhencharging.

•Neverchargeafrozenordamagedbattery.

•NeverchargeaLi-batterywithtemperature

below0°C(32°F)ifnotspeciedbythebattery

manufacturer.

•Neveruseachargerwithdamagedcables.

Ensurethatthecableshavenotbeendamaged

byhotsurfaces,sharpedgesorinanyother

way.

•Neverplaceafan-cooledchargersothatdust,

dirtorsimilarcanbesuckedintothefan.

•Adamagedcablemustbereplacedbya

CTEKrepresentativeusinganoriginalpart

suppliedbyCTEK.Adetachablecablecanbe

replacedbytheuserusinganoriginalpartsup-

pliedbyCTEK.

•Connectiontothemainssupplymustbein

accordancewiththenationalregulationsfor

electricalinstallations.

•Chargerswithgroundedmainsplugmustonly

beconnectedtoagroundedsocketoutlet.

•Duringcharging,Lead-Acidbatteriescould

emitexplosivegases.Preventsparkscloseto

thebattery.Provideforgoodventilation.

•ChargerswithIP-classlowerthanIPx4are

designedforindooruse.Seetechnicalspeci-

cation.Donotexposetorainorsnow.

•Connectthechargertothebattery´spositive

poleandthentothenegativepole.Forbatter-

iesmountedinsideavehicle,connectthenega-

CONGRATULATIONS

tothepurchaseofyournewprofessionalswitchmodebatterycharger.Thischargeris

includedinaseriesofprofessionalchargersfromCTEKSWEDENABandrepresentsthe

latesttechnologyinbatterycharging.

4 • EN

tiveconnectiontothevehiclechassisremote

fromthefuelpipe.Thenconnectthechargerto

mainssupply.

•Disconnectthechargerfromthemainssupply.

Nextremovethenegativeconnection(vehicle

chassis)andthenthepositiveconnection.

•Don’tleaveanybatteryunattendedfora

longerperiodoftimeduringcharging.Ifany

erroroccursdisconnectthechargermanually.

•(IEC 7.12 ed.5)Thisapplianceisnot

intendedforusebypersons(includingchildren)

withreducedphysical,sensoryormentalcapa-

bilities,orlackofexperienceandknowledge,

unlesstheyhavebeengivensupervisionor

instructionconcerninguseoftheapplianceby

apersonresponsiblefortheirsafety.Children

shouldbesupervisedtoensurethattheydonot

playwiththeappliance.

(EN 7.12)Thisappliancecanbeusedby

childrenagedfrom8yearsandaboveand

personswithreducedphysical,sensoryor

mentalcapabilities,orlackofexperienceand

knowledgeiftheyhavebeengivensupervi-

sionorinstructionconcerninguseoftheappli-

anceinasafewayandunderstandthehazards

involved.Childrenshallnotplaywiththeappli-

ance.Cleaningandusermaintenanceshallnot

bemadebychildrenwithoutsupervision.

EN • 5

NORMAL

BAT TERY

PROGRAM

ERROR LAMP

AGM

BAT TERY

PROGRAM

fULLY ChARGEdREAdY TO USE

RECONd

PROGRAM

SUPPLY

PROGRAM

POWER

LAMP

hOW TO ChARGE

1. Connectthechargertothebattery.

2. Connectthechargertothewallsocket.Thepowerlampwillindicatethatthemains

cableisconnectedtothewallsocket.Theerrorlampwillindicateifthebatteryclamps

areincorrectlyconnected.Thereversepolarityprotectionwillensurethatthebattery

orchargerwillnotbedamaged.

3. PresstheMODE-buttontoselectchargingprogram.

4. Followthe8-stepdisplaythroughthechargingprocess.

ThebatteryisreadytostarttheenginewhenSTEP4islit.

ThebatteryisfullychargedwhenSTEP7islit.

5. Stopchargingatanytimebydisconnectingthemainscablefromthewallsocket.

MOdE-

BUT TON

TEMPERATURE

SENSO R

INdICATOR

Produktspecifikationer

Varumärke:	Ctek
Kategori:	Batteriladdare
Modell:	MXS 10

Behöver du hjälp?

Om du behöver hjälp med Ctek MXS 10 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Batteriladdare Ctek Manualer

Ctek READY AUTOMOTIVE Bruksanvisning

22 September 2024

Ctek MXS 5.0 CHECK Acculader Bruksanvisning

12 September 2024

Ctek MXS 5.0 POLAR Acculader Bruksanvisning

12 September 2024

Ctek MXS 5.0 Test and Charge Acculader Bruksanvisning

12 September 2024

Ctek PRO25SE Acculader Bruksanvisning

11 September 2024

Ctek MXTS70 Acculader Bruksanvisning

11 September 2024

Ctek MXT 14 Acculader Bruksanvisning

11 September 2024

Ctek MXS 3.8 Acculader Bruksanvisning

11 September 2024

Ctek Njord Go Acculader Bruksanvisning

11 September 2024

Ctek D250TS Acculader Bruksanvisning

11 September 2024

Batteriladdare Manualer

Nyaste Batteriladdare Manualer

Hager TKC110 Bruksanvisning

18 Juni 2025

Hager XEV601C Bruksanvisning

17 Juni 2025

Hager XEV426 Bruksanvisning

17 Juni 2025

Hager XEV202 Bruksanvisning

17 Juni 2025

Hager XEV201 Bruksanvisning

16 Juni 2025

Joy-it SBC-Buck04-5V Bruksanvisning

12 Juni 2025

Schwaiger LAD230 531 Bruksanvisning

9 April 2025

Schwaiger 658699 Bruksanvisning

9 April 2025

Schwaiger LAD440 532 Bruksanvisning

9 April 2025

Ergotron 97-939 Bruksanvisning

3 April 2025