CyberData Systems 11394 Bruksanvisning


Läs gratis den bruksanvisning för CyberData Systems 11394 (3 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 14 recensioner. Har du en fråga om CyberData Systems 11394 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Quick Start Guide 931182A
The IP Endpoint Co mpany
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide,
which is available in the Downloads tab at the following webpage:
http://www.cyberdata.net/voip/011393/
Note You can also navigate to the Downloads tab by going to
www.CyberData.net and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch PoE Injector
Set PoE power type to Class 0 = 15.4W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
1
3 4
2
SIP Speaker
Part Numbers: 011393 (RAL 9002, Gray White)
011394 (RAL 9003, Signal White)
SIP Speaker
Quick Start Guide


Produktspecifikationer

Varumärke: CyberData Systems
Kategori: högtalare
Modell: 11394

Behöver du hjälp?

Om du behöver hjälp med CyberData Systems 11394 ställ en fråga nedan och andra användare kommer att svara dig