CyberData Systems SIP-enabled IP V2 Bruksanvisning

CyberData Systems högtalare SIP-enabled IP V2

Läs gratis den bruksanvisning för CyberData Systems SIP-enabled IP V2 (4 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 16 recensioner. Har du en fråga om CyberData Systems SIP-enabled IP V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Quick Start Guide 930398E
The IP Endpoint Company
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide,
which is available on the Documentation page at the following website
address:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2/docs.html
Note You can also navigate to the Documentation page by going to
www.CyberData.net
and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch PoE Injector
Set PoE power type to Class 0 = 15.4W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
2
3
1
VoIP V2 Ceiling Speaker
Quick Start Guide


Produktspecifikationer

Varumärke: CyberData Systems
Kategori: högtalare
Modell: SIP-enabled IP V2

Behöver du hjälp?

Om du behöver hjälp med CyberData Systems SIP-enabled IP V2 ställ en fråga nedan och andra användare kommer att svara dig