CyberData Systems SIP-enabled VoIP V3 Bruksanvisning

CyberData Systems Intercomsystem SIP-enabled VoIP V3

Läs gratis den bruksanvisning för CyberData Systems SIP-enabled VoIP V3 (4 sidor) i kategorin Intercomsystem. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 13 recensioner. Har du en fråga om CyberData Systems SIP-enabled VoIP V3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Quick Start Guide 930503A
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide,
which is available on the Documentation page at the following website
address:
http://www.cyberdata.net/products/voip/digitalanalog/intercomemergency/docs.html
Note You can also navigate to the Documentation page by going to
www.CyberData.net
and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch PoE Injector
Set PoE power type to Class 0 = 13W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
2
3
1
VoIP Emergency Intercom
Quick Start Guide
The IP Endpoint Company


Produktspecifikationer

Varumärke: CyberData Systems
Kategori: Intercomsystem
Modell: SIP-enabled VoIP V3

Behöver du hjälp?

Om du behöver hjälp med CyberData Systems SIP-enabled VoIP V3 ställ en fråga nedan och andra användare kommer att svara dig