CyberData Systems V3 SIP-enabled IP Bruksanvisning

CyberData Systems Intercomsystem V3 SIP-enabled IP

Läs gratis den bruksanvisning för CyberData Systems V3 SIP-enabled IP (4 sidor) i kategorin Intercomsystem. Guiden har ansetts hjälpsam av 36 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 18.5 recensioner. Har du en fråga om CyberData Systems V3 SIP-enabled IP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Quick Start Guide 930473A
1.0 Out-of-Box and Prior to Final Installation
1.1. Download the current manual, otherwise known as an Operation Guide,
which is available on the Documentation page at the following website
address:
http://www.cyberdata.net/products/voip/digitalanalog/intercomv3/docs.html
Note You can also navigate to the Documentation page by going to
www.CyberData.net and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch PoE Injector
Set PoE power type to Class 0 = 13W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
12
3
VoIP V3 Outdoor Intercom
Quick Start Guide
The IP Endpoint Company


Produktspecifikationer

Varumärke: CyberData Systems
Kategori: Intercomsystem
Modell: V3 SIP-enabled IP

Behöver du hjälp?

Om du behöver hjälp med CyberData Systems V3 SIP-enabled IP ställ en fråga nedan och andra användare kommer att svara dig