D-Link SharePort Go II DIR-508L Bruksanvisning
D-Link
Åtkomstpunkt
SharePort Go II DIR-508L
Läs gratis den bruksanvisning för D-Link SharePort Go II DIR-508L (4 sidor) i kategorin Åtkomstpunkt. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4 recensioner. Har du en fråga om D-Link SharePort Go II DIR-508L eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
DIR-508L
SharePort™ Go II
Wireless N300 Portable Router
and Charger
If any of the above items are missing, please contact your reseller.
Package Contents
• DIR-508L Portable Router
• 4000 mAh Li-ion battery
• Power Adapter
• Quick Install Guide
Thank you for purchasing the DIR-508L Portable Router and
Charger. Follow the easy steps in this guide to properly set
up your router.
Quick Install Guide
LED Color Status Description
Power/Status
LED
Green
Solid The device is connected to the Internet and properly
working.
Blinking The device is processing WPS.
Orange
Solid Device is powering up.
Blinking
Cannot connect to the Internet or receive an IP address
from the uplink side. This may also indicate that the device
is in recovery mode.
Red Solid The device is defective.
O Device is turned o or in charging mode.
Battery LED
Green Solid Battery is at 80% or higher capacity.
Orange Solid Battery is between 15% and 80% capacity.
Red Solid Battery is lower than 15% capacity.
Blinking Battery is malfunctioning.
O Charging completed. (adapter plugged)
Out of battery.
Reset Button
SD Card Slot
Power Port Internet Port
USB Port
WPS Button
Mode Switch
Up = On
Middle = O
Down = Charger
Power/Status
Battery
Product Overview Charge and Connect
1 4
5
6
Make sure the DIR-508L is charged* or plugged in before using.
2Slide the mode switch up to On. Allow
one minute for the device to boot up.
ON
OFF
Cha rger
3From your device’s wireless utility, connect to the DIR-508L.
The default network name (SSID) is DIR508L with no password.
* Actual usable capacity may vary depending on charging conditions.
Open a web browser (e.g., Internet Explorer, Firefox,
Chrome, or Safari) and go to http://dlinkrouter.local./
(or http://192.168.0.1).
At the login screen, click or press
the Log in button (no password).
Click or press the ! icon to select a wireless network (HotSpot
Mode). You may instead connect an Ethernet cable from an
Internet source such as a broadband modem to the Internet
port (see note below).
Note: If you are connecting directly to a broadband modem and are using either PPPoE or a
static IP connection, click or press Settings Internet Proles > and create a new prole with your
Internet connection type. A dynamic connection (e.g., Cable) will connect automatically without
conguration.
Please refer to the user manual available at http://www.dlink.com/DIR-508L for more
information.
Produktspecifikationer
| Varumärke: | D-Link |
| Kategori: | Åtkomstpunkt |
| Modell: | SharePort Go II DIR-508L |
Behöver du hjälp?
Om du behöver hjälp med D-Link SharePort Go II DIR-508L ställ en fråga nedan och andra användare kommer att svara dig
Åtkomstpunkt D-Link Manualer
24 December 2024
26 September 2024
26 September 2024
13 September 2024
29 Augusti 2024
26 Augusti 2024
25 Augusti 2024
24 Augusti 2024
24 Augusti 2024
22 Augusti 2024
Åtkomstpunkt Manualer
- Netis
- Netgear
- Hercules
- Dahua Technology
- Draytek
- Cambium Networks
- Media-tech
- Linksys
- AMX
- HP
- Planet
- ICC
- Engenius
- Mercusys
- Silex
Nyaste Åtkomstpunkt Manualer
9 April 2025
9 April 2025
5 April 2025
2 April 2025
20 Mars 2025
28 Februari 2025
27 Januari 2025
26 Januari 2025
14 Januari 2025
14 Januari 2025