Dell PowerEdge 1855 Bruksanvisning
Läs gratis den bruksanvisning för Dell PowerEdge 1855 (78 sidor) i kategorin Server. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Dell PowerEdge 1855 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/78

Dell™PowerEdge™1855SystemsInstallationandTroubleshootingGuide
Introduction
Indicators, Codes, and Messages
Finding Software Solutions
Running System Diagnostics
Troubleshooting Your System
Installing System Options
Getting Help
DIP Switch Settings and Connectors
I/O Ports and Connectors
Notes, Notices, and Cautions
Abbreviations and Acronyms
For a complete list of abbreviations and acronyms, see the "Glossary" in the User's Guide.
Information in this document is subject to change without notice.
©2005DellInc.Allrightsreserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerConnect, PowerVault, PowerApp, and Dell OpenManage are
trademarks of Dell Inc.; Intel, Pentium, and Celeron are registered trademarks of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Initial release: 20 August 2004
Last revised: 30 June 2005
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Back to Contents Page
DIP Switch Settings and Connectors
Dell™PowerEdge™1855SystemsInstallationandTroubleshootingGuide
DIP Switch Settings—AGeneralExplanation
Server Module Board DIP Switch
Server Module Board Connectors
Disabling a Forgotten Password
This section provides detailed information about the sever-module board DIP switch settings. It also provides some basic information on switches and
describes the connectors on the various boards in the system.
—DIP Switch Settings AGeneralExplanation
DIP switches provide a convenient and reversible way of reconfiguring the circuitry on a printed circuit board. When reconfiguring the system, you may need to
change DIP switch settings on circuit boards or drives.
DIP Switches
DIP switches are small blocks on a circuit board with one or more slide switches emerging from them. Each slide switch on the DIP switch is designated by a
number. To change a DIP switch setting, move the appropriate slide switch to either the "on" or "off" position. FigureA-1 shows an example of a DIP switch.
Figure A- 1. Example DIP Switch
FigureA-2 shows the location and default settings of the sever-module board DIP switch. See TableA-1 for information about the DIP switch designations,
default settings, and functions.
Server Module Board DIP Switch
FigureA-2 -1 shows the location of the configuration DIP switch on the server module board. TableA lists the settings for the DIP switch.
Figure A- 2. Server Module Board DIP Switch
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: FigureA-2 is oriented as viewed from the front of the server module.

Table A- -1. Server ModuleDIPSwitchSettings
Server Module Board Connectors
See FigureA-3 and TableA-2 for the location and description of server module board connectors.
Figure A- 3. Server Module Board Connectors
DIP Switch
Setting
Description
PASSWD
(Switch 1)
(default)
The password feature is enabled when switch 1 is set to "on."
The password feature is disabled when switch 1 is set to "off."
NVRAM_CLR
(Switch 2)
(default)
The configuration settings in NVRAM are retained at system boot when switch 2 is set to "off."
The configuration settings in NVRAM are cleared at next system boot when switch 2 is set to "on."
"on" "off"
Produktspecifikationer
Varumärke: | Dell |
Kategori: | Server |
Modell: | PowerEdge 1855 |
Behöver du hjälp?
Om du behöver hjälp med Dell PowerEdge 1855 ställ en fråga nedan och andra användare kommer att svara dig
Server Dell Manualer
20 Februari 2025
6 Februari 2025
12 December 2024
12 December 2024
12 December 2024
16 Oktober 2024
21 September 2024
21 September 2024
18 September 2024
12 September 2024
Server Manualer
- Asus
- Monacor
- Black Box
- Acer
- LaCie
- KanexPro
- EMC
- Tripp Lite
- Atlantis Land
- Teradek
- Digi
- Gigabyte
- Advantech
- HGST
- Asrock
Nyaste Server Manualer
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
27 Juli 2025