Denver CRB-619 MK2 Bruksanvisning

Denver Radio CRB-619 MK2

Läs gratis den bruksanvisning för Denver CRB-619 MK2 (9 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4.5 recensioner. Har du en fråga om Denver CRB-619 MK2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

ENGLISH

FUNCTION AND CONTROLS

1. POWER ON – OFF / ALARM OFF BUTTON

2. SOURCE BUTTON

3. MEMORY/ CLK.ADJ. BUTTON

4. ALARM 1 ON-OFF SET BUTTON

5. SNOOZE / SLEEP / DIMMER BUTTON

6. ALARM 2 ON-OFF SET BUTTON

7. SKIP BACK BUTTON

8. MEMORY UP / PLAY / PAUSE BUTTON / PAIR BUTTON

9. SKIP FORWARD BUTTON

10. VOLUME KNOB

11. SPEAKER

12. SET KNOB

13. BATTERY COMPARTMENT (BOTTOM OF UNIT)

14. DISPLAY

15. RATING LABEL (BOTTOM OF UNIT)

16. LINE IN JACK

17. DC POWER INPUT

18. USB CHARGING SOCKET

19. FM ANTENNA

ENG-1

CRB-619BLACK MK2

LED DISPLAY

PREPARATION FOR USE

AC-DC adaptor connection: The retro radio unit can be powered

by an external AC-DC adaptor, required the output DC 5V 1.5A

(included).

POWER CONNECTION

Plug the AC-DC adaptor to a household outlet AC source, connect

the adaptor’s DC output plug to the DC POWER INPUT Jack of

the main unit. This unit is equipped with a battery back up system;

it requires a “AAA” batteries x 2 (not included). Insert the battery

in the battery compartment, making certain that the positive and

negative (+and-) battery terminals are attached to the corresponding

terminals on the plate in the battery compartment. If an AC power

failure occurs, the clock automatically switches to the battery power

supply, the clock and timer memory continue running. When the AC

power resumes, the clock switches back to AC again.

TO SET CLOCK MANUALLY:

1. Press and hold the CLK.ADJ. button (3) in standby mode and

keep depress over 2 seconds to enter time set mode. The

display “24 Hr” will ash.

2. Turn the SET KNOB (12) to adjust the “12 Hr” or “24 Hr” mode.

3. Press the CLK.ADJ. button (3). The time display will ash.

4. Turn the SET KNOB (12) to adjust the clock and press the clock

adjust button the clock setting is complete.

Note:

- Press SKIP BACK BUTTON (7) button to adjust data backward.

- Press SKIP FORWARD button (9) to adjust data forward.

- Keep depress SKIP BACK (7) or SKIP FORWARD (9) button for

2 seconds to enable auto forward.

PM Indicator

AUX Indicator

ALARM 1 Indicator

BLUETOOTH Indicator

FM Indicator

ALARM 2 Indicator

TIME Indicator

ENG-2

SETTING THE ALARMS:

1. Press and hold the (4) alarm 1 or (6) alarm 2 button until the

alarm time ashes.

2. Turn the SET KNOB (12) to set the desired alarm time, Press the

alarm button the setting is complete.

Note:

- Press SKIP BACK button (7) to adjust data backward.

- Press SKIP FORWARD button (9) to adjust data forward.

- Keep depress SKIP BACK (7) or SKIP FORWARD (9) button for

2 seconds to enable auto forward.

ENABLE / DISABLE THE AL ARM

Press and hold the “ALARM 1” (4) / “ALARM 2” (6) button to enable

or disable the alarm. Once the alarm is activated, the bell symbol

will be appeared on the display.

ALARM DURATION

Beep alarm or radio alarm will continue output for 60 minutes if no

key press, then it will stop automatically and wait for same alarm

time on next day.

SNOOZE FUNCTION

When the alarm rings, press Snooze button (5) will activate the

snooze function, Beep alarm or Radio alarm will stop.

Note: The interval time of the snooze is 9 minute (not include second

offset)

Snooze will continue unless press ON/OFF button (1) to alarm off of

Buzzer alarm or Radio Alarm stop automatically after 60 minutes.

SLEEP OPERATION

When listening to radio, press Sleep button (5) to enter sleep mode.

You can just adjust the sleep timer from 120 mins to 10 mins by

pressing the Sleep button (5). The unit will automatically turn off

after the selected time.

DIMMER CONTROL

In standby mode, press the DIMMER (5) button allows you to set the

brightness of the LED display to high, low levels.

1. The clock display with dimmer low is the default setting.

2. It will consume more power if you set the clock display with

dimmer higher.

ENG-3

Produktspecifikationer

Varumärke:	Denver
Kategori:	Radio
Modell:	CRB-619 MK2
Enhetsplacering:	Aanrecht
Innehåll (inuti):	20 l
Typ av operation:	Buttons, Rotary
Magnetronkraft:	700 W
Power grill:	1000 W
Färg på produkten:	Zwart
Antal effektnivåer:	5
Dörrgångjärn:	Links
Inbyggd display:	Ja
Timer:	Ja
Bredd:	439.5 mm
Djup:	328 mm
Höjd:	257.6 mm
Nettoskatt:	- W
Grill:	Ja
Barnlås:	Ja
Avfrostningsfunktion:	Ja